SECURITRON MAGNALOCK CORPORATION
SECURITRON MAGNALOCK CORPORATION Electromagnetic Lock Face Mount 600 lb
Face-mount electromagnetic lock delivers 600 lb holding force with instant release and dual-voltage 12/24 V DC operation
- Product typeFace Mount
- Face mount design simplifies installation on door frames
- 600 lb holding force secures heavy-duty doors reliably
- Dual 12 or 24 V DC input matches common access systems
- Low 300 mA draw at 12 V reduces power supply load
- Stainless steel construction resists corrosion for long service life
Electromagnetic Lock 600 lb Holding
The Securitron magnetic lock provides 600 pounds of holding force for access-controlled doors. It operates on 12 or 24 volt DC input with a current draw of 300 mA at 12 V or 150 mA at 24 V. The face-mount body measures 8 inches long by 1 7/8 inches wide by 1 39/64 inches deep and projects 2 1/4 inches from the wall. Instant release action opens the door immediately when power is cut.
Suits Single-Door Access Control.
This lock fits single-door installations that require 600 lb holding strength and 12/24 V DC power. It is not suitable for openings that demand a higher holding force rating or for frames that cannot accommodate the 8-inch body length and 2 1/4-inch projection. Buyers needing different voltage options or a narrower profile should consider other models.
600 lb Holding Force Decides Fit
The 600-pound holding force is the primary specification that determines whether this lock meets the security requirement for the opening. Verify that the door and frame can accept the 8-inch length, 1 7/8-inch width and 1 39/64-inch depth before ordering.
How it compares
Measured against everything we stock in Door Lock Sets & Deadbolts, at today’s prices. Recalculated every night.
- Price $232.99
- Pricier than about 86% of the 2,145 comparable items (median $55.99).
Specifications
| Product | |
|---|---|
| Brand name | Securitron |
| Product type | Face Mount |
Questions about this item
How can I verify the 600 lb holding force is active after wiring the 12 V DC supply?
Measure 300 mA current draw at the 12 V input and confirm the armature bonds instantly with no mechanical latch sound.
What mounting hardware comes with the face-mount electromagnetic lock and what must I source separately?
The lock body and strike plate are included; mounting screws, 12/24 V DC power supply and access-control wiring are not supplied.
Should I choose the 12 V or 24 V input for a new installation using this 600 lb maglock?
Both voltages work; 24 V draws only 150 mA for longer cable runs, while 12 V draws 300 mA and suits existing 12 V systems.
More in Door Lock Sets & Deadbolts
Similar items
YINGHUA ICRead03-04 13.56Mhz RFID Reader door lock
- Entrance
- Chain Guard
Deltana Enterprises Grade 1 Commercial Entry Lock Clarendon Brushed Chrome
YINGHUA ICRead03-01 13.56Mhz RFID USB Reader door lock
- Entrance
- Chain Guard
Master Lock Lockout Padlock Keyed Alike Orange 1-13/16 in Pack of 3
- Safety
Yale 4705LN Storeroom Cylindrical Lock 626
- Door Hardware & Com…
- 4700LN Augusta





