We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Box of 5000 electro-galvanized steel pins, 21 gauge, 2 inch length

Senco

Senco 21-Gauge 2 in. Electro-Galvanized Medium Head Pins (5,000-Pack) pneumatic accessory

SKU CH-F175-6NE33

21-gauge, 2-inch electro-galvanized medium-head pins in a 5,000-count strip pack for finish nailers

  • Main materialHAWA
  • 21-gauge precision for fine finish work with minimal surface marking
  • 2-inch length suits trim and moulding applications in a single fastener
  • Electro-galvanized steel resists corrosion on interior and protected exterior projects
  • Glue-collated strips feed smoothly through FinishPro 21LXP without jamming
  • 5,000-pack quantity reduces reload frequency on extended jobs

21-Gauge 2 in. Medium Head Pins

These 21-gauge electro-galvanized steel pins measure 2 inches long with a 0.029 inch shank diameter. They feature a chisel point and smooth shank for clean penetration in finish work. The medium head style provides secure holding power for trim and moulding applications. Supplied in a 5000-count strip collation pack for continuous fastening.

Glue strip collation loads quickly into compatible

The pins are assembled in strip form using glue collation that feeds smoothly through the magazine. Simply insert the full strip into the tool's loading channel and advance to the first fastener. Misfeeds can occur if the strip is bent or if debris blocks the feed path. Always keep the collation dry and straight for reliable operation.

Verify your nailer accepts 21-gauge 2 inch strip

Check that your pneumatic finish nailer is rated for 21-gauge wire and a 2 inch maximum fastener length. The tool must also support glue-collated strip magazines, not coil or plastic strip types. Using incorrect gauge or length pins will cause jams and may damage the driver mechanism.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $32.99
Pricier than about 55% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameSenco
Product typeOther
Size & build
Main materialHAWA

Questions about this item

How do I verify the 21-gauge pins are feeding correctly after loading them into the FinishPro 21LXP?

Fire a few test pins into scrap material; they should drive flush with the medium head seated cleanly and the chisel point penetrating without bending or jamming.

What comes in the 5,000-pack and what else is needed to use them?

The pack contains 5,000 electro-galvanized steel pins, 21 gauge, 2 in. long with a smooth shank and chisel point, glue-collated in strips; you only need a compatible FinishPro 21LXP nailer to drive them.

Which pin length and gauge should I select for trim work with the FinishPro 21LXP?

Choose the 2 in., 21-gauge pins listed here; they match the tool's specification and provide the holding power needed for medium-head finish applications.

More in Bits, Hole Saws & Accessory Kits

Similar items