We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Box of 4000 bright 15-gauge 1-1/2 inch brad nails on 34-degree tape strips

Senco

Senco DA17EPBN 15 ga 1-1/2 in Brad Nails 4000 pk

SKU CH-DRKP-DSP7Z

A 4000-count pack of 15-gauge, 1-1/2-inch steel brad nails with a 34-degree tape collation for pneumatic finish nailers

  • Product typePneumatic Nails & Staples
  • 1-1/2 in length suits trim and finish work
  • 15 gauge steel shank gives strong holding power
  • Bright plain finish for clean appearance in visible areas
  • 34° tape collation feeds smoothly in compatible nailers
  • 4000-piece pack reduces reload frequency on the job

Senco 15-gauge 1-1/2 in Brad Nails 4000 pk

These 15-gauge angled finishing nails measure 1-1/2 inches in length and come in a 4,000-piece pack. They are made of plain-finished steel with a smooth shank, a brad head and a conical point for clean entry into trim and moulding.

For finish carpenters using 15-gauge angled nailers

The nails are collated in 34-degree tape strips that feed only tools designed for that angle and gauge. Builders whose nailers accept straight collation, different gauges or other angles cannot use this pack.

34-degree tape collation decides fit

The 34-degree strip collation is the single specification that determines whether the nails will cycle in a particular nailer. Verify that the tool manual lists 34-degree 15-gauge tape strips before purchasing.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $36.99
Pricier than about 59% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameSENCO
Product typePneumatic Nails & Staples

Questions about this item

Will these 15 ga 34-degree tape-collated brads feed reliably in my older 15 ga finish nailer?

These nails are 15 gauge, 1-1/2 inch length, 34-degree tape collation, smooth shank, and conical point — match those specs to your tool's manual.

How can I confirm the 4000-count pack feeds without jams after loading a strip?

Load a full strip, fire several nails into scrap wood; consistent depth, no misfires, and clean tape separation mean it is working.

What comes in the box and is anything else needed to use them?

The box contains 4000 collated 15 ga brad nails; you only need a compatible 15 ga angled finish nailer and air supply.

More in Bits, Hole Saws & Accessory Kits

Similar items