SharkBite U358LF 1/4 in DZR Brass Push-Fit Tee Trap
Connects three quarter-inch tubes in a tee layout using push-fit DZR brass rated to 200 psi for potable water
- Product typeDrain Components
- Push-fit connections install fast without tools
- DZR brass resists dezincification for long service life
- Rated to 200 psi maximum operating pressure
- Three 1/4 in ports simplify tee configurations
- Lead-free material meets potable-water requirements
SharkBite 1/4 in DZR Brass Tee
This SharkBite push-fit tee connects three 1/4 inch tubes in potable water systems. The DZR brass body resists dezincification for long service life. All three ports use push-to-connect ends for tool-free installation. The fitting is rated for 200 psi maximum operating pressure.
Replacing threaded or soldered tees
It replaces fittings that require thread sealant, flux or a torch. The jump is worth it when a quick, flame-free connection is needed in tight spaces or on repair jobs. No pre-applied thread sealant is included because the push-fit design seals on the tube outer diameter. California Proposition 65 warnings apply to this product.
Three-port capacity for simple branches
The tee comfortably handles standard 1/4 inch tube runs at the rated pressure. It runs out when the application demands larger tube diameters, higher pressure ratings or a different alloy not covered by the DZR brass construction. The material grade is 316.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 88% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Sharkbite |
| Model name | U358LF |
| Product type | Drain Components |
Questions about this item
What tube size fits the three push-to-connect ports on this SharkBite U358LF tee?
Each of the three ports accepts 1/4 in outer-diameter tubing for a push-fit connection.
How do you correctly install the push-fit connections on this DZR brass tee?
Cut the tube square, deburr the edge, then push it fully into each port until it stops; the internal grab ring and O-ring seal without tools.
What ongoing maintenance does this 200 psi rated brass tee require?
Periodically inspect for leaks or corrosion; replace the fitting if the O-ring degrades or the brass shows signs of dezincification.
More in Drain Stoppers, Strainers & Traps
Similar items
360EXPRESS DCS-2P drain sticks 24 pack
- DCS-2P, 360EXPRESS
- Breaks down clogs a…
$7.99
0.00009743BTC
In stock
Fernco Inc.
Fernco Inc. QC-105 PVC Trap 5 in 4.3 psi 140°F
- Drain Components
- HAWA
$7.99
0.00009743BTC
In stock