We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 5-port PWM fan hub with 35 cm cables and adhesive backing

Sign 1007 5-port 35 cm 4-pin PWM fan hub

SKU CH-T2QS-YSCCB MPN 1007

A 35 cm PWM fan hub expands one motherboard 4-pin header into five ports for 3-pin or 4-pin fans

  • Type detailsDesktop
  • Powers five fans from one CPU header using 35 cm cables
  • Supports both 3-pin and 4-pin PWM fans on every port
  • Tinned copper conductors maintain full fan speed without signal loss
  • 9 mm adhesive backing secures hub inside any chassis
  • 1007 22 AWG PVC-insulated wire rated to 80 °C for safe operation

Compact 5-port PWM fan hub

The Sign 1007 hub expands a single 4-pin motherboard header into five fan connections. It accepts both 3-pin and 4-pin plugs, making it useful for builders who need more headers than the board provides.

Simple install with adhesive backing

A 35 cm lead reaches the CPU fan header while the 2.9 mm thick adhesive pad secures the hub inside the chassis. The first port passes the tachometer signal back to the board; the remaining four run PWM control without extra configuration.

Limited by single-header power budget

All five fans draw current from one 4-pin header, so total load must stay within the motherboard's rated output. The hub adds no external power input and cannot drive fans that exceed that shared limit.

How it compares

Measured against everything we stock in Signs & Sign Holders, at today’s prices. Recalculated every night.

Price $13.99
Cheaper than about 80% of the 153 comparable items (median $23.99).

Specifications

Product
Brand nameUniversal
More details
Type detailsDesktop

Questions about this item

How do I confirm the 1007 hub is controlling fan speed correctly after connecting it to the motherboard 4-pin header?

The first port on the hub connects to the CPU fan header so the motherboard reads its RPM; the other four ports then follow that PWM signal.

What comes in the box and what must I source separately for the 1007 5-port hub?

The hub with 35 cm 22 AWG leads and a 2.9 mm adhesive pad is included; fans and any extra mounting tape are not.

Should I choose the 35 cm wire length or a custom length for the 1007 hub?

The standard 35 cm reach suits most mid-tower builds; select a custom length only if your cable routing demands more or less.

More in Signs & Sign Holders

Similar items