We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal 4U rackmount server chassis with three 5.25 front bays and lockable front door

Silverstone

Silverstone RM400 4U server chassis 3×5.25" bays CEB/ATX/mITX

SKU CH-RCK7-TKNFM

4U rackmount server chassis supporting SSI-CEB, ATX and mini-ITX motherboards with three 5.25" drive bays, 160mm PSU depth, seven expansion slots.

  • Chassis styleRackmount
  • Rackmount form factor fits standard 4U server racks
  • Three 5.25" drive bays allow flexible optical or hot-swap device installation
  • Supports SSI-CEB, ATX and micro-ATX motherboards for broad platform compatibility
  • Accepts ATX/PS2 or mini redundant power supplies up to 160mm deep
  • Front USB 3.1 Gen 1 ports deliver 5Gbps speed with USB 2.0/1.1 backward compatibility

4U rackmount server chassis

The SilverStone RM400 is a 4U rackmount server chassis built for professional and data-centre environments. It accepts SSI-CEB, ATX and mATX motherboards and provides three 5.25-inch front bays for optical drives or hot-swap modules. A lockable front door adds physical security for shared racks. Two PWM fans, one 120mm and one 80mm, are included for airflow.

Thermals noise and power

The included 120mm and 80mm PWM fans adjust speed to load, keeping noise lower during light work. The chassis supports ATX or mini redundant power supplies up to 160mm deep, allowing efficient power delivery without excess cable clutter. Front I/O uses USB 3.1 Gen 1 at 5Gbps, backward compatible with USB 2.0 and 1.1, so peripherals draw minimal power. Seven standard-profile expansion slots give room for add-in cards without blocking airflow paths.

Upgrade path and fit

This chassis replaces older 4U cases that lack USB 3.1 Gen 1 front ports or support only ATX boards. The jump is worth it when you need SSI-CEB motherboard clearance, three 5.25-inch bays and a lockable door in one unit. Builders who require more than seven expansion slots or 2.5-inch hot-swap bays should look elsewhere. It also does not suit towers or wall-mount installations.

How it compares

Measured against everything we stock in Rackmount Server Cases, at today’s prices. Recalculated every night.

Price $301.99
Pricier than about 66% of the 1,006 comparable items (median $222.49).

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

Size & build
Chassis styleRackmount

Questions about this item

How do I fit the RM400 into a rack and which step is often missed?

Secure the chassis with four cage nuts per side using the front mounting ears, then verify the rear support brackets are engaged — installers often skip the rear brackets.

What upkeep will the two included PWM fans need over time?

The 120 mm and 80 mm PWM fans should be cleaned of dust every few months and replaced if bearing noise appears; both use standard 4-pin connectors for easy swaps.

What thermal limit appears first when the RM400 runs fully loaded for hours?

The single 120 mm front intake and 80 mm rear exhaust can become the bottleneck, so sustained loads may raise internal temperatures faster than in dual-intake designs.

More in Rackmount Server Cases

Similar items