Simmtec, Inc 16GB DDR3-1600 ECC REG 1.35V 240-pin DIMM
16 GB DDR3 ECC registered module at 1.35 V, 1600 MHz with CL11 latency
- Total capacity16 GB
- Product type240-Pin DDR3 SDRAM
- 16 GB capacity for high-density server workloads
- Registered ECC design improves data integrity
- Low-voltage 1.35 V operation reduces power draw
- DDR3-1600 speed delivers 12800 MT/s bandwidth
- Micron 2Rx4 240-pin DIMM built for reliability
Simmtec 16GB DDR3-1600 ECC REG DIMM
This 16GB DDR3 module operates at 1600MHz with a low 1.35V voltage. It features registered signal processing and ECC data integrity for server stability. The 240-pin form factor fits compatible DDR3 slots. Micron chips provide the memory density.
Suits servers needing registered ECC DDR3 memory
This module fits systems requiring 2RX4 organisation and CL11 latency at the PC3-12800R standard. Builders using unbuffered desktop boards or platforms limited to 1.5V DDR3 should look elsewhere. It does not support non-ECC or consumer chipsets.
Registered ECC at 1.35V DDR3-1600
The registered buffer reduces electrical load on the memory controller. ECC corrects single-bit errors automatically. The 1.35V operation lowers power draw versus standard voltage DDR3. Verify your board accepts registered modules before purchase.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $39.99
- Cheaper than about 87% of the 6,523 comparable items (median $188.99).
- Total capacity 16 GB
- Lower than about 60% of the 6,064 comparable items (median 32 GB).
- Price per GB $2.50 per GB
- Cheaper than about 92% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Total capacity | 16 GB |
| Product type | 240-Pin DDR3 SDRAM |
Questions about this item
Will the 16GB DDR3-1600 ECC REG DIMM downclock to match slower DDR3 modules already installed in the server?
The module operates at 1600 MHz with CL11 latency; the system memory controller sets the final speed when mixed with slower DDR3 DIMMs.
How can I confirm the 2RX4 registered ECC module is recognised and error-correction is active after installation?
Check the BIOS memory info for 16 GB, 1600 MHz, registered mode and ECC enabled; run a memory diagnostic to verify error detection.
Does the 240-pin DIMM ship alone or with a heatsink, and is a low-voltage 1.35 V power supply required separately?
The box contains only the 16 GB DDR3-1600 REG ECC DIMM; no heatsink or extra power supply is included.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KVR400X72C3A/1G 1GB DDR 400 ECC Unbuffered server RAM
- 1 GB
- DDR 400 (PC 3200)
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Kingston Technology Corp. KVR266X72C25/1G 1GB DDR 266 ECC Unbuffered server RAM
- 1 GB
- DDR 266 (PC 2100)
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Kingston Technology Corp. KVR400D2D8R3/2G 2GB DDR2 400 ECC Registered server RAM
- 2 GB
- DDR2 400





