Simmtec, Inc 2GB DDR3 PC-8500 1066MHz 204pin CL7 server RAM
2GB DDR3 server module running at 1066 MHz with CL7 latency and 204-pin form factor
- Total capacity2 GB
- 2 GB capacity lets you run more programs simultaneously
- DDR3 1066 MHz speed keeps data moving quickly
- PC3-8500 rating matches server memory standards
- 204-pin SO-DIMM fits compatible notebook and server slots
- CL7 latency reduces wait cycles for faster response
2 GB DDR3 PC3-8500 server SO-DIMM
This module is a 2 GB DDR3 PC3-8500 stick running at 1066 MHz with CL7 latency. It uses a 204-pin SO-DIMM form factor suited for compatible server and notebook platforms. The chip is identified as Micron MT16JSF25664HZ-1G1F1. It is supplied new and ready for installation.
Suitable for DDR3 systems needing a single 2 GB
Builders expanding a DDR3 server or notebook that accepts 204-pin SO-DIMMs at PC3-8500 speed can use this module. It will not fit systems requiring full-size 240-pin DIMMs or boards that only support higher-density chips. Buyers needing larger capacities or different pin counts must select another part.
204-pin SO-DIMM form factor decides fit
The 204-pin connector is the sole physical interface that determines whether this stick installs in your hardware. Verify the motherboard or laptop manual specifies 204-pin DDR3 SO-DIMM support before purchase. Capacity, speed and latency are secondary if the slot does not match.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 99% of the 6,523 comparable items (median $188.99).
- Total capacity 2 GB
- Lower than about 98% of the 6,064 comparable items (median 32 GB).
- Price per GB $5.00 per GB
- Cheaper than about 73% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Total capacity | 2 GB |
Questions about this item
Which capacity should I choose for this DDR3 server module?
The module provides 2GB of DDR3 memory in a single 204-pin SO-DIMM.
What does the 1066MHz rating deliver in a real machine?
The module runs at 1066MHz DDR3 with CL7 latency, rated PC3-8500 for peak bandwidth.
What interface does this 204-pin DDR3 module use and what does it cap?
It uses a 204-pin DDR3 SO-DIMM interface operating at 1066MHz, limited by the DDR3 standard.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Simmtec, Inc 8GB DDR3-1600 ECC REG PC3-12800 for PowerEdge M710HD server RAM
- 8 GB





