Simmtec, Inc 64GB (4x16GB) DDR3 1066 PC3-8500 ECC RDIMM for PowerEdge R810
A 64 GB DDR3 kit of four 16 GB ECC registered modules running at 1066 MHz for the PowerEdge R810
- Total capacity64 GB (4 × 16 GB)
- 64 GB total capacity from four matched 16 GB modules
- DDR3 1066 MHz speed rated as PC3-8500 for server workloads
- ECC registered design detects and corrects single-bit errors
- Qualified for Dell PowerEdge R810 systems
- Built with Micron, Samsung, Hynix or Elpida components meeting JEDEC standards
64 GB DDR3 ECC RDIMM kit
This 64 GB kit consists of four 16 GB DDR3 1066 registered DIMMs built for the Dell PowerEdge R810. It targets administrators upgrading or repairing that specific server platform with validated ECC memory.
Capacity and headroom
The 64 GB total provides substantial headroom for virtualisation workloads and large in-memory databases on the R810. The four-module layout fills four slots, so further expansion requires removing existing DIMMs.
Dell-qualified part number
Each module carries the SNPY898NC/16GB part number confirmed for the PowerEdge R810. That qualification reduces the risk of POST errors or unsupported-configuration alerts during deployment.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $38.99
- Cheaper than about 88% of the 6,523 comparable items (median $188.99).
- Total capacity 64 GB (4 × 16 GB)
- Higher than about 70% of the 6,064 comparable items (median 32 GB).
- Price per GB $0.61 per GB
- Cheaper than about 99% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Total capacity | 64 GB (4 × 16 GB) |
Questions about this item
Will the four 16 GB modules install alongside existing DDR3 RDIMMs already in the PowerEdge R810?
Each stick is a 16 GB DDR3 1066 PC3-8500 ECC registered DIMM; the server will run all populated slots at the speed of the slowest module present.
How can I verify the kit is running at 1066 MHz with ECC active after installation?
Check the BIOS memory information or use a tool such as dmidecode to confirm each DIMM reports 1066 MT/s, PC3-8500 and ECC enabled.
Does the package contain only the four 16 GB RDIMMs or are any cables or brackets included?
The box holds four 16 GB DDR3 1066 PC3-8500 ECC registered DIMMs; no cables, brackets or additional hardware are supplied.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KVR266X72C25/1G 1GB DDR 266 ECC Unbuffered server RAM
- 1 GB
- DDR 266 (PC 2100)
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Kingston Technology Corp. KVR400D2D8R3/2G 2GB DDR2 400 ECC Registered server RAM
- 2 GB
- DDR2 400
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Kingston Technology Corp. KVR16R11D8/8KF 8GB DDR3 1600 ECC Registered server RAM
- 8 GB
- DDR3 1600





