Simmtec, Inc 8GB 2X4GB PC3-10600 ECC REG DDR3 DIMM server RAM
ECC registered DDR3 server memory kit totalling 8 GB in two 4 GB modules
- Total capacity8 GB (2 × 4 GB)
- ECC protection prevents data errors in servers
- Registered design improves signal integrity for stability
- 8 GB total capacity across two modules
- PC3-10600 speed rating for DDR3 systems
- 25 years of supplier experience in components
Server Memory Kit
This Simmtec kit provides 8 GB of DDR3 server memory in a matched pair of 4 GB registered DIMMs with ECC. It is intended for compatible server or workstation boards that require registered error-correcting modules. It will not function in standard desktop or laptop platforms.
Thermals and Power
Registered DDR3 DIMMs of this capacity operate within standard JEDEC voltage and thermal envelopes for server environments. No additional cooling beyond normal chassis airflow is required. Power draw remains low during typical multi-threaded workloads.
Upgrade Context
The kit replaces smaller or non-ECC modules in systems that support PC3-10600 registered memory. The jump is worthwhile when ECC protection and registered signalling are mandated by the platform. It does not suit builds needing unbuffered desktop memory or higher-density single modules.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $22.99
- Cheaper than about 93% of the 6,523 comparable items (median $188.99).
- Total capacity 8 GB (2 × 4 GB)
- Lower than about 80% of the 6,064 comparable items (median 32 GB).
- Price per GB $2.87 per GB
- Cheaper than about 90% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Total capacity | 8 GB (2 × 4 GB) |
Questions about this item
How do I install the 2×4 GB DDR3 ECC REG DIMMs, and what step is often missed?
Power down the server, open the chassis, align each module's notch with the slot key, press firmly until the retention clips click, then verify in BIOS that all 8 GB are recognised and ECC is enabled — the step most often missed is enabling ECC in the firmware after physical installation.
What maintenance or replacement will this DDR3 ECC REG memory need later?
No routine maintenance is required; keep the server's air intake clean so the modules stay cool, and replace a stick only if the system logs correctable ECC errors that exceed the platform's threshold or if a module fails POST.
What limit appears first under sustained heavy load with this PC3-10600 DDR3 memory?
The rated 10600 MB/s bandwidth ceiling is reached before any thermal throttle, so sustained write/read workloads will saturate the bus first.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KVR400D2S8R3/1G 1GB DDR2 400 server RAM
- 1 GB
- DDR2 400
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
A-Tech 8GB 2Rx8 PC3L-12800R DDR3L 1600MHz ECC RDIMM 1.35V Server RAM
- 8 GB
- DDR3L 1600
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
A-Tech 8GB DDR3L 1333MHz ECC RDIMM 2Rx8 1.35V server RAM
- 8 GB
- DDR3L 1333





