SK hynix 64GB DDR4 2133 CL15 1.2V 4Rx4 LRDIMM B260 M4 v4
64 GB DDR4 2133 CL15 1.2 V 4Rx4 ECC LRDIMM for high-density server workloads
- Total capacity64 GB
- Rated speedDDR4 2133 (PC4 17000)
- ChipsetMajor Brand Chipset
- CAS latencyCL15
- Rated voltage1.2 V
- Buffer typeLoad Reduced
- 64GB capacity supports dense virtualisation workloads
- DDR4 2133 speed delivers high bandwidth for data-intensive tasks
- CL15 latency provides responsive memory access
- 2V operation reduces power draw in large deployments
- 4Rx4 Load Reduced ECC design maximises reliability and signal integrity
High-density server module
This SK hynix 64GB DDR4 2133 module is a 288-pin LRDIMM with ECC and a 4Rx4 rank structure. It operates at 1.20V with a CAS latency of CL15 and carries Supermicro certification for validated compatibility. The load-reduced design allows higher per-slot capacity in supported platforms.
Suited for memory-bound workloads
Administrators expanding Supermicro-qualified servers or Cisco UCS B-Series B260 M4 v4 systems can use this module to increase total memory without adding slots. It is not for consumer desktops or workstations that require unbuffered non-ECC UDIMMs. Buyers needing registered RDIMM instead of load-reduced LRDIMM should verify their platform requirements before ordering.
64GB 4Rx4 LRDIMM at DDR4 2133
The single specification that determines fit is the 4Rx4 load-reduced organisation combined with DDR4 2133 speed and ECC. Only platforms qualified for this rank structure and voltage will recognise the full 64GB capacity per module.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $194.99
- Typical for this category: the median of 6,523 items is $188.99.
- Total capacity 64 GB
- Higher than about 70% of the 6,064 comparable items (median 32 GB).
- Price per GB $3.05 per GB
- Cheaper than about 89% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | SK hynix inc. |
| Model name | HMAA8GL7MMR4N-TF (MEM-DR464L-HL01-LR21) |
| Total capacity | 64 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Load Reduced |
| Memory rank | 4Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
Questions about this item
Does the 288-pin DDR4 2133 LRDIMM fit the B260 M4 v4 memory slots?
The module uses the standard 288-pin DDR4 form factor at 2133 MT/s and is Supermicro certified for the B260 M4 v4, so it installs directly into the server's DIMM slots without adapters.
What is the correct way to seat this 4Rx4 64GB ECC module during installation?
Align the notch on the 288-pin edge connector with the slot key, press straight down until both retention clips click, and verify the system recognises the full 64GB at DDR4 2133 CL15 in BIOS.
Will the 1.20V LRDIMM require any firmware or thermal maintenance over its service life?
The module runs at 1.20V with no heat spreader and no moving parts; ensure the server's airflow remains unobstructed and apply any B260 M4 v4 BIOS updates from Supermicro for continued compatibility.
More in ECC Server RAM
Similar items
RIMLANCE RES25600D8C2K32 32GB (2x16GB) DDR4 3200 ECC SODIMM 2Rx8
- 32 GB (2 × 16 GB)
- DDR4 3200
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Brute Networks 16GB DDR4-2933 2Rx8 ECC RDIMM server RAM
- 16 GB
- Major Brand Chipset
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Brute Networks 16GB DDR4-3200 2Rx4 ECC RDIMM P14398-B21
- 16 GB
- 1.2 V





