SKF 99150 Shaft Sleeve 1.497-1.503 in
Stainless steel wear sleeve for 38.02 to 38.18 mm shafts with chromium-plated finish rated to 225 degrees F
- Product colorTransparent
- Fits shafts from 1.497 to 1.503 in for precise sealing
- Stainless steel with chromium plating resists corrosion in heavy industrial use
- Withstands temperatures up to 225 °F for reliable high-heat performance
- Thin 0.28 mm wall and 9.53 mm shaft width enable compact installation
- Tight tolerances of ±1.6 mm OD and ±0.8 mm width ensure consistent fit
Shaft Sleeve for 38 mm Shafts
The SKF 99150 wear sleeve fits shaft diameters from 38.02 mm to 38.18 mm. Its stainless steel body carries a chromium plated finish for corrosion resistance. The sleeve suits heavy industrial applications where shaft surfaces need protection or restoration. It installs directly onto the shaft without requiring a larger housing bore.
Thermal Limit and Dimensional Tolerances
Maximum operating temperature reaches 225 Degrees F for sustained service. Outside diameter tolerance is held to +/- 1.6 mm while width tolerance sits at +/- 0.8 mm. Wall thickness measures 0.28 mm, keeping radial clearance minimal. The metric design ensures consistent fit across the stated shaft range.
Flange and Width on Shaft
A 45.24 mm flange diameter locates the sleeve axially during installation. Overall width is 12.7 mm with 9.53 mm of active contact width on the shaft. These dimensions position the wear surface precisely where the seal rides. The transparent colour allows visual inspection of the underlying shaft condition.
How it compares
Measured against everything we stock in Interior Cleaning Brushes & Cloths, at today’s prices. Recalculated every night.
- Price $39.99
- Pricier than about 89% of the 541 comparable items (median $15.99).
Specifications
| Product | |
|---|---|
| Brand name | SKF |
| Product color | Transparent |
Questions about this item
How do I install the SKF 99150 shaft sleeve onto a 38.02-38.18 mm shaft?
Press the chromium-plated stainless steel sleeve onto the clean shaft until the 9.53 mm shaft-contact width seats fully; the 0.28 mm wall thickness requires even pressure to avoid distortion.
What maintenance or replacement does the SKF 99150 sleeve need over time?
Inspect the 0.28 mm wall for wear grooves or chromium-plate damage; replace the sleeve if the 45.24 mm flange shows corrosion or the press fit loosens on the 38.02-38.18 mm shaft.
What is the first limit reached under sustained heavy-industrial use of the SKF 99150 sleeve?
The 225 °F maximum temperature limit is reached before the 0.28 mm wall wears through, especially when shaft speed generates heat faster than the 12.7 mm overall width can dissipate it.
More in Interior Cleaning Brushes & Cloths
