SlickBlue 37 Inch Electric Fireplace Recessed
A 37-inch recessed electric fireplace with adjustable flames, dual 750W and 1500W heat settings, and remote control up to 10 ft
- Surface finishBlack
- Recessed 37-inch design fits flush into walls
- Dual control via remote up to 10 ft and LED panel
- Adjustable flames with 4 colours, 5 brightness and 5 speed levels
- Two heat settings 750 W and 1500 W delivering 5100 BTU for rooms up to 400 sq ft
- ETL certified with overheat protection, sleep mode and 1-8 hour timer
37 Inch Recessed Electric Fireplace
The SlickBlue 37 inch electric fireplace installs recessed into a wall opening. A black steel and tempered glass finish measures 37 by 6.5 by 26.02 inches and weighs 51.2 lbs. It connects to a standard 120V 60Hz outlet using a 5.7 ft power cord and provides two heat settings of 750W and 1500W.
Suits rooms up to 400 sq ft wanting flame ambience
The unit heats spaces up to 400 square feet with 5100 BTU output and offers four flame colours, four log colours, five brightness levels and five flame speeds. The flame effect runs independently of the heater. It is not for buyers needing a primary heat source for larger areas, built-in fuel combustion or outdoor installation.
750W or 1500W selectable heat output
Choose 750W for gentle warmth or 1500W for maximum 5100 BTU heating. Both settings operate on the same 120V circuit. A timer from 1 to 8 hours and a sleep mode activated by holding the dimmer button for six seconds add convenience. ETL certification and overheat protection are included.
How it compares
Measured against everything we stock in Fireplaces & Hearth Accessories, at today’s prices. Recalculated every night.
- Price $147.99
- Cheaper than about 76% of the 118 comparable items (median $244.49).
Specifications
| Size & build | |
|---|---|
| Surface finish | Black |
Questions about this item
What are the exact wall opening dimensions for the 37-inch recessed fireplace?
The unit measures 37 inches wide, 6.5 inches deep and 26.02 inches high, so the rough opening must accommodate those dimensions plus any required clearances.
How do you activate sleep mode on the control panel?
Press and hold the DIMMER button for six seconds to enable sleep mode for quiet overnight operation.
How often should the overheat protection sensor be checked or replaced?
The ETL-certified overheat protection is a sealed safety device that requires no routine maintenance or replacement under normal use.
More in Fireplaces & Hearth Accessories
Similar items
tuphen 20 inch Electric Fireplace 3D Log Set Antique Black
- Antique Black





