SmallHD Indie 7 7" Full-HD Touchscreen On-Camera Monitor
A 7-inch Full-HD touchscreen on-camera monitor with 1920 x 1200 resolution, 1000-nit brightness, 10-bit colour, HDMI and 3G-SDI I/O supporting UHD 4K30 input.
- Sharp Full-HD detail from 1920 x 1200 IPS panel
- Bright 1000-nit screen stays visible in daylight
- 10-bit colour processing delivers accurate on-set monitoring
- HDMI and 3G-SDI ports accept UHD 4K30 signals
- Four 1/4"-20 threads plus 3.5 mm audio jack
Compact 7" Full-HD On-Camera Monitor
The SmallHD Indie 7 is a 7" Full-HD touchscreen on-camera monitor built for professional monitoring. It uses a 1920 x 1200 IPS LCD with 10-bit colour processing and a 16:9 aspect ratio. A brightness of 1000 nits and a 1000:1 contrast ratio provide clear visuals in bright conditions. The unit runs PageOS 4 firmware for touchscreen control.
Suited for Mobile Production Crews
This monitor suits camera operators and videographers who need a lightweight, daylight-viewable screen with flexible mounting. Four 1/4"-20 threads on the sides, bottom and back allow multiple rig configurations. A 3.5 mm headphone jack enables audio monitoring from the HDMI signal. It is not for users who require wireless video transmission or built-in recording capabilities.
Sustained Bright Outdoor Performance
Under continuous use the 1000-nit panel maintains visibility in direct sunlight without dimming. The 10-bit processing preserves colour accuracy during long shooting days. HDMI and 3G-SDI input and output ports handle extended 4K30 signals via HDMI without signal drop. The aluminium chassis dissipates heat passively to support reliable operation over time.
How it compares
Measured against everything we stock in Camcorder Rigs, Cases & Add-Ons, at today’s prices. Recalculated every night.
- Price $785.99
- Pricier than about 91% of the 423 comparable items (median $40.99).
Specifications
No published specifications for this item yet.
Questions about this item
What camera output does the Indie 7 need to receive a UHD 4K30 signal?
The Indie 7 accepts UHD 4K30 video through its HDMI input port.
Can the Indie 7 pass a 3G-SDI signal to an older recorder that only supports 1080p?
Yes, the 3G-SDI output passes the incoming signal so a 1080p recorder will receive a compatible feed.
How do I confirm the Indie 7 is displaying the correct 1920 x 1200 resolution after setup?
Open the PageOS 4 info page; it shows the active input resolution and the panel’s native 1920 x 1200 pixel grid.
More in Camcorder Rigs, Cases & Add-Ons





