SMUGDESK 0.2M 90° Down Angled USB 2.0 Male to Female Flat Ribbon Flex Extension Cable
A 90° down-angled flat ribbon cable extends a USB 2.0 port by .2 m for tight-fit data and charging connections
- 90° down-angled connector fits tight spaces and embedded installs
- Flat ribbon flex cable routes cleanly in narrow gaps
- USB 2.0 delivers 480 Mbps data transfer and charging
- Male-to-female extension adds reach to standard USB-A ports
- 2 m ultra-short length suits close-range device wiring
Ultra-Short Angled Extension
This 0.2 metre cable adds a 90° down-angled USB 2.0 male-to-female connector for tight-fit and embedded installations. The flat ribbon flex structure allows ultra-thin, flexible routing in narrow spaces. It supports 480 Mbps data transfer and reliable power charging for standard peripherals. Ideal for short-range connections in compact devices or enclosed systems.
Replaces Straight Bulk Connectors
The right-angle elbow eliminates the protrusion of a straight plug, clearing height-restricted ports on embedded boards or small electronics. Upgrade when a standard cable blocks adjacent slots, bends sharply against a chassis wall, or forces an enclosure lid open. The jump is worth it only where vertical clearance is the limiting factor.
Simple Plug-In Routing
No tools or drivers are required; insert the male end into the host port and attach the peripheral to the female end. The flat ribbon flexes cleanly around corners but must not be creased sharply or folded repeatedly at the same point. Ensure the down angle points toward the available clearance, otherwise the connector fights the space it was meant to save.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 80% of the 15,227 comparable items (median $14.99).
Specifications
No published specifications for this item yet.
Questions about this item
How much clearance does the 90° down-angled connector need behind the USB-A port?
The ultra-thin flat ribbon adds almost no height, so the elbow sits flush against the port face and only requires the depth of the connector body itself.
Which way should the ribbon face when I plug the male end into a recessed port?
Route the flat cable so it bends downward from the connector; forcing it upward kinks the ribbon and can break the internal traces.
Will repeated bending of the 0.2 m flat ribbon degrade the 480 Mbps signal?
The ribbon is rated for flexible routing, not continuous flexing; keep the bend radius gentle and static to maintain reliable data and power delivery.
More in USB Cords & Extension Cables
Similar items
Nippon Labs USB-15-MF-BK USB 2.0 A Male to A Female Extension Cable 15 ft
- USB A to USB A
- USB 2.0 Extension C…
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE PQ001 USB4 Gen 3x2 cable 1.5ft 40Gbps 240W 8K@60Hz Copper
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Vszerda UC-004 Micro USB Y Splitter Cable USB-C & Micro USB
- Micro USB
- Micro USB





