SMUGDESK 25cm 90° DownAngled USB 3.0 to Micro USB 3.0 Panel Cable with Locking Screw
A 25cm panel-mount cable with a 90° down-angled Micro USB 3.0 connector, locking screw and 5Gbps data transfer for vibration-resistant embedded installs
- Space-saving panel fit from 90° down-angled connector
- Vibration-proof link secured by locking screw
- Fast 5Gbps transfers via USB 3.0 interface
- Compact 25cm length suits tight chassis builds
- Heavy-duty construction endures continuous industrial use
Compact Panel Cable for Embedded Builds
This 25 centimetre panel‑mount cable links a USB 3.0 host to a Micro USB 3.0 device using a 90° down‑angled connector. It is designed for installers who need a short, fixed run inside compact chassis, industrial enclosures or surveillance housings where straight plugs would foul neighbouring components.
Low‑Profile Locking Connector
The downward bend keeps the cable close to the panel surface, freeing space behind the mount. A captive locking screw secures the Micro USB 3.0 plug so it cannot back out under vibration or repeated thermal cycling, while the reinforced jacket and strain‑relieved ends withstand continuous heavy‑duty handling.
Stable 5 Gbps Link with Minimal Power Overhead
USB 3.0 signalling delivers up to 5 Gbps throughput for large‑file transfers without active electronics that would add heat or noise. The short length and passive construction keep voltage drop negligible, so the link stays reliable in embedded systems that run continuously on limited power budgets.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 80% of the 15,227 comparable items (median $14.99).
Specifications
No published specifications for this item yet.
Questions about this item
Does the USB 3.0 interface deliver the full 5Gbps bandwidth in practice?
The cable is rated for USB 3.0 5Gbps transfer speed, so it will sustain that bandwidth provided the host controller and connected device both support USB 3.0.
What panel cut-out and clearance does the 90° down-angled Micro USB 3.0 connector need?
The connector requires a standard Micro USB 3.0 panel opening and enough depth behind the panel for the 90° downward bend, which keeps the cable close to the chassis surface.
How do I secure the locking screw correctly during installation?
Align the Micro USB 3.0 plug, seat it fully, then tighten the captive locking screw by hand until snug; the screw prevents the connector from backing out under vibration.
More in USB Cords & Extension Cables
Similar items
Nippon Labs USB-15-MF-BK USB 2.0 A Male to A Female Extension Cable 15 ft
- USB A to USB A
- USB 2.0 Extension C…
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE PQ001 USB4 Gen 3x2 cable 1.5ft 40Gbps 240W 8K@60Hz Copper
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Vszerda UC-004 Micro USB Y Splitter Cable USB-C & Micro USB
- Micro USB
- Micro USB





