SMUGDESK 90 Degree Down-Angled USB 3.0 Type-A to Micro-B Cable with Panel Mount Screws 3.0m
A 3.0 m USB 3.0 Micro-B cable with a 90° down-angled plug and panel-mount screws for secure, vibration-resistant industrial camera and machine-vision installations
- 90° down-angled connector prevents upward cable strain in bottom-mount setups
- USB 3.0 high-speed transfer keeps industrial camera feeds stable and real-time
- Panel-mount screws lock the cable in place for vibration-proof security
- 0 m length allows tidy routing across machine-vision and surveillance rigs
- Heavy-duty shielding blocks electromagnetic interference for long-term reliability
90 Degree Down-Angled USB 3.0 Cable
This 3.0 metre cable connects USB 3.0 Type-A hosts to Micro-B devices using a 90 degree down-angled plug. Panel mount screws secure the connector for vibration resistant industrial camera and machine vision installations.
Replaces Straight Cables in Tight Panels
The angled design removes upward cable bend that stresses straight connectors in bottom mount enclosures. The jump is worth it when panel depth is limited or when equipment vibration risks disconnection over time.
USB 3.0 Length and Shielding Limits
The 3.0 metre length meets the USB 3.0 electrical specification without active signal boosting. Heavy duty shielding resists electromagnetic interference but longer runs would require a repeater or active cable not supplied here.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $24.99
- Pricier than about 86% of the 15,227 comparable items (median $14.99).
Specifications
No published specifications for this item yet.
Questions about this item
How much clearance does the 90 degree down-angled connector need below the port?
The 90 degree down-angled connector points straight down so the cable runs parallel to the panel, removing the upward bend that a straight plug would need.
What is the step people miss when they install the panel mount screws?
The screws thread into the connector flange itself; you must fasten them before routing the cable or the flange can rotate and strip the threads.
When should the 3.0 m shielded cable be replaced in a high-vibration machine vision rig?
Replace it if the outer jacket shows abrasion, the screw heads loosen repeatedly or intermittent data errors appear during continuous capture.
More in USB Cords & Extension Cables
Similar items
Cables To Go 39978 USB 2.0 active extension cable A male to A female beige 16.4 ft
- USB A to USB A
- USB 2.0
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE TJ-Thunderbolt5 USB4 cable 80Gbps 240W 1.6 FT
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Vszerda 4-pack DC 5.5 mm x 2.1 mm female to USB-C male 15 cm power cable
- Dc 5.5 mm X 2.1 mm,…
- 15 cm





