SMY Lighting Recessed LED Deck Light Kit 6 Pack Upgrade Version Silver
Six warm-white 1.5 W IP67 deck lights with a 12 V transformer install in 42 mm holes for steps, patios or kitchen plinths
- Surface finishSilver
- Main materialMetal
- Bright starry ambiance from warm 2800-3200K LEDs
- Low 12V DC power with 1.5W per light cuts energy use
- IP67 waterproof 304 stainless steel body withstands outdoor conditions
- Simple drill-and-push install fits 42mm cut-out in deck or step
- 50000-hour lifespan and 800 lumen output give lasting illumination
Kit Contents & Purpose
The SMY Lighting Recessed LED Deck Light Kit includes six silver-finished metal fixtures and a DC12V power supply. It is designed for homeowners wanting low-voltage accent lighting for indoor or outdoor stairs, patios, decks, and kitchen plinths.
Deciding Specification
Each fixture draws 1.5W and produces 800 lumens at a warm white colour temperature of 2800K to 3200K. The IP67-rated, glue-filled bodies with 304 stainless steel construction ensure full waterproof insulation for safe in-ground or wet-location installation.
Build Integration
The kit operates on a 12V transformer accepting AC90-265V input, with a maximum load of 15W supporting up to ten lights in series. Installation requires drilling a 42mm cut-out hole for each 55mm diameter light, spaced up to one metre apart along the 3M cable run.
How it compares
Measured against everything we stock in LED Lighting Kits, at today’s prices. Recalculated every night.
- Price $27.99
- Cheaper than about 60% of the 1,591 comparable items (median $33.99).
Specifications
| Size & build | |
|---|---|
| Surface finish | Silver |
| Main material | Metal |
Questions about this item
How bright will the 800 lm output look once the lights are recessed in a deck?
The 800 lm total from the six 1.5 W fixtures produces a warm white 2800–3200 K glow with a 120° beam, giving a soft starry effect on steps and patios rather than a focused spotlight.
What does the DC 12 V low-voltage interface limit in a real installation?
The included 15 W transformer caps the run at ten fixtures in series, with a maximum 1 m spacing between lights, so longer runs need an additional power supply.
What hole size and depth are needed to mount each 55 mm diameter fixture?
Drill a 42 mm cut-out and allow 20 mm clearance behind the surface; the stainless-steel body pushes in and sits flush with the 3M cable exiting the back.
More in LED Lighting Kits
Similar items
Unique-Bargains 4-Pin 10mm Male-to-Male LED Connector Black
Thomasville Lighting ES-2M60Strip-RGB light kit 6.6Ft 60 LED RGB 5050 IP65 28-key remote
- Light kit inlcuded…
- Light kit inlcuded,…





