SQUARE D 9013FHG Pressure Switch 80-100PSI DPST 10A
Pressure switch for air compressors and water pumps with 80 to 100 psi range and 20 psi differential
- Product typeLight Switch
- Reliable pressure control for air compressors and water pumps
- Factory-set 80-100 psi range with 20 psi differential
- DPST contact form handles up to 10 A electrical loads
- NEMA 1 enclosure suits indoor installation environments
- Supports 1.5 hp at 120 V and 2 hp at 240 V single-phase
Pressure Switch 80–100 PSI DPST
The Square D 9013FHG is a pressure switch designed for air compressors and water pumps. It operates with a factory-set on/off range of 80 to 100 psi and a 20 psi differential. The unit features a DPST contact form rated at 10 amps and a single 1/4 inch FNPT port.
Sustained Load Behaviour
Under continuous cycling the switch maintains its 80 to 100 psi band with a consistent 20 psi differential. The NEMA 1 enclosure provides basic indoor protection for the electrical contacts. Standard action ensures reliable make/break performance across the full 20 to 100 psi operating range.
Upgrade Context
This model replaces switches with lower pressure ranges or different contact configurations. The jump is worthwhile when a system requires the specific 80 to 100 psi band and DPST switching for dual-circuit control. It is not suited for applications needing an unloader valve or outdoor-rated enclosures.
How it compares
Measured against everything we stock in Electrical Switches & Dimmers, at today’s prices. Recalculated every night.
- Price $21.99
- Cheaper than about 77% of the 791 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | Square D |
| Product type | Light Switch |
Questions about this item
Does the 9013FHG run hot or draw extra power when the compressor cycles all day?
The switch is a mechanical contact rated 10 A at 120 V or 240 V; it adds no measurable heat or power draw beyond the motor it controls.
What fittings and wiring must I already have to install this pressure switch?
You need a 1/4 in FNPS port connection and supply wires sized for up to 10 A at your circuit voltage.
Will the 80-100 psi range work with my older 120 V single-phase motor rated below 1 1/2 hp?
Yes, the DPST contacts are rated 1 1/2 hp at 120 V single-phase, so motors up to that rating are compatible.
More in Electrical Switches & Dimmers
Similar items
Hubbell Incorporated HBL8210I Straight Blade Receptacle 5-15R 15 A Ivory
- Ivory
- Wiring Devices
Leviton Manufacturing Co. 052-10097-008 pull chain switch
Hubbell Incorporated HBL1221R Red Toggle Light Switch 20A 120/277V
- Red
- Red
Hubbell Incorporated HBL5362R Straight Blade Receptacle 5-20R 20 A Red
- Red
- Wiring Devices





