SQUARE D Control Station Open/Close 2NO 30 mm

Industrial Control Station for Machine Operation

The SQUARE D 30 mm control station provides two momentary push buttons labelled Open and Close for direct machine control. It mounts on a wall through a 1/2 in to 3/4 in NPT hub and uses a zinc enclosure rated NEMA 4 and IP66 for indoor or outdoor industrial environments. The unit is suited for operators who need a dedicated start-stop interface at the point of use.

Thermals Noise and Power in Normal Use

The contacts are rated 5 A at 600 V AC and 24 V DC with a NEMA B600/P600 designation so heat and noise stay negligible during typical momentary operation. No pilot lights or active electronics are present so the station draws no power when idle and adds no audible sound to the panel. The sealed enclosure keeps dust and water jets out without requiring extra cooling.

What It Replaces and When the Jump Is Worth It

This station replaces a loose pendant or a makeshift button box when a fixed NEMA 4 wall mount with two mechanically independent momentary operators is required. The jump is worth it when the application demands an IP66 zinc housing, 2NO contacts rated for 600 V AC, and a pre-legend Open/Close layout that eliminates field labelling. Buyers who need maintained action operators, pilot lights, or a different contact configuration should look elsewhere.