SQUARE D XACA04H7 Pendant Enclosure 22mm 4 Holes Yellow
Yellow pendant enclosure with four 22 mm holes, IP65 and NEMA 1, 4, 4X ratings, and cable entry from 0.31 in to 1.02 in
- Brand nameSCHNEIDER ELECTRIC
- Yellow enclosure improves visibility on site
- Four 22 mm holes accept standard pushbuttons and switches
- Cable entry range .31 in to 1.02 in fits common cord sizes
- IP65 and NEMA 1, 4, 4X ratings protect against dust and water jets
- UL Listed, CSA and EN/IEC certified for compliant installations
Yellow Pendant Enclosure with Four 22 mm Holes
This Schneider Electric enclosure provides a yellow plastic housing rated NEMA 1, 4, 4X and IP65 for pendant-style control stations. It accepts up to four 22 mm operators and includes a cable sleeve for entries between 0.31 in and 1.02 in. The unit meets CSA, EN/IEC, UL and RoHS requirements for industrial environments.
Four Operator Positions with Sealed Cable Entry
The four 22 mm holes accommodate standard pushbuttons, selector switches or pilot lights in a single pendant station. The integrated cable sleeve seals round cables from 0.31 in to 1.02 in diameter, maintaining the IP65 rating. Applications requiring more than four devices or larger cable diameters will need a different enclosure.
IP65 and NEMA 4X Rating for Wet and Corrosive Areas
The enclosure carries NEMA 4X and IP65 ratings, making it suitable for wash-down, outdoor and mildly corrosive locations where dust and water jets are present. Buyers needing higher pressure wash-down protection or submersion ratings should verify those requirements against the stated certifications.
How it compares
Measured against everything we stock in Bench & DC Power Supplies, at today’s prices. Recalculated every night.
- Price $150.99
- Pricier than about 83% of the 677 comparable items (median $33.99).
Specifications
| Product | |
|---|---|
| Brand name | SCHNEIDER ELECTRIC |
Questions about this item
Will the 22 mm holes line up with my existing push-button stations?
The enclosure has four 22 mm holes spaced for standard 22 mm operators, so your current push-buttons, selector switches or pilot lights will mount directly without new drilling.
How can I confirm the IP65 seal is effective after I wire the cable sleeve?
After threading cable through the supplied sleeve and tightening the gland, inspect that the sleeve compresses evenly around the cable jacket and that the cover gasket sits flat; a brief low-pressure water spray test will verify the IP65 rating.
Does the yellow plastic housing include the cable sleeve, or do I need to order it separately?
The cable sleeve is included in the box; no extra parts are required for the 0.31 in to 1.02 in cable entry range.
More in Bench & DC Power Supplies
Similar items
Analog Technologies, Inc. AHV12VN5KV1MAW HV DC-DC Power Supply Module 12VDC Input -5KV Output 1mA
- -5KV
- 1 mA
Samlex America Evolution F Series 1200W 120V Pure Sine Wave Inverter Charger 24V 40A
- Samlex America
Schneider Electric 9001KY2 30 mm 2-Hole Aluminum Enclosure
- SCHNEIDER ELECTRIC
Eaton 10250T706G 30 mm Hazardous Location Push Button Green 1NO/1NC
- EATON
- 30 mm





