We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small bare metal ring terminal with #10 stud hole and crimp barrel

Sta-Kon

Sta-Kon NW52 Ring Terminal #10 Stud 18 AWG 600 V Bare

SKU CH-7MBQ-V31T9

Connects 18 to 20 AWG wire to a #10 stud with a crimp barrel and 600 V rating

  • Product typeElectrical Connectors
  • #10 stud fits common terminal blocks
  • 18 AWG barrel accepts 20–18 AWG wire
  • 600 V rating suits standard low-voltage circuits
  • bare nickel-alloy contact resists oxidation at 200 °F
  • 31 in tongue aligns with standard #10 hardware

Purpose and fit

The Sta-Kon NW52 is a non-insulated ring terminal designed for 18 AWG conductors and a #10 mounting stud. It suits panel wiring on heaters, toasters and similar appliances where a bare nickel-alloy barrel is acceptable.

Accessory impact

No insulation sleeve or colour coding is supplied so the installer must add heat-shrink or tape if dielectric protection is required. The bare barrel allows direct visual inspection of the crimp joint before the connection is energised.

Build and daily use

A 0.1 in barrel length and 0.31 in tongue width fit standard crimp tools without shimming. The 0.28 in hole spacing matches common terminal blocks while the 600 V rating and 1,200 °F temperature limit cover typical mains-powered heating elements.

How it compares

Measured against everything we stock in Wire, Cable & Wiring Supplies, at today’s prices. Recalculated every night.

Price $946.99
Pricier than about 93% of the 1,610 comparable items (median $25.99).

Specifications

Product
Brand nameSTA-KON
Product typeElectrical Connectors

Questions about this item

How often should the crimp on the NW52 terminal be re-inspected after installation?

Inspect the crimp periodically for corrosion or loosening, especially in high-vibration environments; the bare nickel-alloy contact has no insulation to hide degradation.

What is the maximum continuous current the 18 AWG barrel can handle before overheating?

The 18 AWG barrel is rated for 600 V; sustained current is limited by the wire ampacity, not the terminal, and the nickel-alloy barrel withstands up to 1,200 °F.

Does the bare metal terminal radiate noticeable heat when carrying load all day?

The terminal itself runs at wire temperature; with a 1,200 °F maximum rating, heat radiation is negligible compared to the conductor insulation limits.

More in Wire, Cable & Wiring Supplies

Similar items