STARTECH USB31000SW USB 3.0 Gigabit Ethernet network card
- 10/100/1000 Mbit/s
- USB
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds a Gigabit RJ45 Ethernet port over USB 3.0 with VLAN tagging, Jumbo Frames and checksum offload
Color Black
The USB31000S adds a single RJ45 port to any USB-enabled computer, delivering full Gigabit bandwidth over a USB 3.0 connection. It is backward compatible with USB 2.0 and 1.x hosts, though speed will be limited by the slower bus. The adapter draws power directly from the USB port and includes Auto-MDIX crossover detection for simple cable installation. Home and business users gain a compact, portable network upgrade without opening the chassis.
Under continuous load the adapter maintains Gigabit line rate because the USB 3.0 interface provides sufficient bandwidth, unlike USB 2.0 alternatives that saturate well below 1000 Mbps. Checksum offload for IPv4, IPv6, TCP and UDP reduces host CPU utilisation during prolonged transfers, while Large Send Offload further eases processing overhead. Jumbo Frame support allows larger Ethernet frames to improve efficiency on compatible networks. Operating temperature range spans 0°C to 40°C for reliable operation in typical indoor environments.
The single specification that determines suitability is the host interface: a USB 3.0 port is required to achieve the advertised 10/100/1000 Mbps performance. On USB 2.0 or 1.x ports the adapter functions but throughput drops to the bus limit, making it unsuitable for users who need true Gigabit rates on legacy connections. Buyers without an available USB 3.0 port should consider this constraint before purchase.
Measured against everything we stock in Ethernet Cards & NICs, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | StarTech.com |
| Model name | USB31000S |
| Performance | |
| Rated speed | 10/100/1000 Mbit/s |
| Connectivity | |
| Supported standards | IEEE802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3az, IEEE 802.1q VLAN tagging |
| Ports & slots | |
| Interface type | USB 3.0 |
| Connection types | 1 x RJ45 |
| Size & build | |
| Product dimensions | 5.3 in × 2.6 in × 1 in |
| Product weight | 0.31 lb (0.14 kg) |
| Shipping weight | 0.13 kg |
| Package size | 165 × 132 × 43 mm |
| In the box | |
| In the box | USB 3.0 to Gigabit Ethernet NIC Network Adapter 1 x Driver CD 1 x Instruction Manual |
| Environment & compliance | |
| Temperature range | Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F) Storage Temperature: -20 °C to 60 °C (-4 °F to 140 °F) |
| Humidity range | < 80% RH |
| More details | |
| Indicator lights | Activity (Yellow) Link (Green) |
Other versions of this model
It is powered directly from the USB 3.0 port with no external supply needed. Operating temperature range is 0°C to 40°C, so it stays within normal limits during continuous use.
A free USB 3.0 Type-A port and an operating system supported by the included driver CD. The adapter is backward compatible with USB 2.0 ports, though speed will be limited by the slower bus.
Yes. It supports 10/100/1000 Mbps speeds and includes Auto MDIX crossover detection, so it will automatically configure the link with legacy 10BASE-T or 100BASE-TX equipment.
More in Ethernet Cards & NICs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?