Sudokoo R-MACH120-GYWPN1-GAS 120mm 30mm case fan 500-3000 RPM
- 120 × 120 × 30 mm
- 1 Fan
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Three 120 mm PWM fans deliver 108 CFM airflow and 7.31 mmAq static pressure at speeds from 500 to 3000 RPM
Model 120mm
Model 3 Packs
The Sudokoo MACH120 3in1 ships as a trio of 120 mm fans built for radiators, full-tower airflow and custom loops. Each unit uses a 3-phase 10-pole FOC motor with a hybrid hydraulic bearing and LCP blades reinforced with 40 % glass fibre. The 30 mm thickness adds structural rigidity for high-RPM operation.
PWM control spans 500 to 3000 RPM ±10 % and can drop to 0 RPM below 5 % duty for silent idle. At full speed a single fan delivers 108 CFM airflow and 7.31 mmAq static pressure while noise stays under 39.9 dB(A). The thick frame improves cooling contact on dense radiators or filtered intakes.
The 4-pin PWM connector draws 12 VDC at 0.50 A for 6 W per fan. Motherboard headers typically cap at 1 A, so two fans per header is the practical limit without a splitter or hub. Three fans on one header would exceed that rating and is not supported by the supplied connectors.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Model name | MACH120 3 in 1 |
| Part number | R-MACH120-GYWPN3-GAS |
| Product type | Case Fan |
| Product color | Black Gray |
| Performance | |
| Rotational speed | 500 to 3,000 RPM+-10% |
| Airflow rate | 108 CFM |
| Air pressure rating | 7.31 mmAq |
| Power | |
| Power input connector | 4-pin PWM |
| Size & build | |
| Fan size | 120 mm |
| Number of fans | 3 Fans |
| Fan depth | 30 mm |
| Bearing design | Hybrid Hydraulic Bearing |
| Product dimensions | 120 × 120 × 30 mm |
| Shipping weight | 1.23 kg |
| Package size | 219 × 181 × 114 mm |
| Environment & compliance | |
| Operating noise | <39.9 dB(A) |
| More details | |
| Fan control | No Controller |
Other versions of this model
Each fan is 120x120x30 mm with a 4-pin PWM connector; the 30 mm thickness adds depth so verify your radiator and case clearance before mounting them next to any other fan.
With PWM control the fans spin between 500 and 3000 RPM ±10 % and can stop at 0 RPM below 5 % PWM duty; monitor RPM in BIOS or fan-control software to verify they respond to temperature curves.
The box contains three 120 mm fans with 4-pin PWM connectors; no fan controller, mounting screws or additional cables are included.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?