SunnyStar Co., Ltd D60SH-12 60mm 25mm 12V .18A 2 Pin case fan
A 60 mm sleeve-bearing case fan running at up to 1600 RPM on 12 V .18 A with a 2-pin connector
- Fan size60 mm
- Bearing designSleeve bearing
- Rotational speed<1,600 RPM
- Power input connector2 Pin
- LED lightingNon-LED
- Product typeCase Fan
- Compact 60 mm frame fits tight chassis spaces
- Sleeve bearing runs under 1600 RPM for quiet airflow
- 12 V, 0.18 A draw keeps power use low
- Two-pin connector plugs straight into legacy headers
- Non-LED black design stays invisible in dark builds
Compact 60 mm case fan for tight builds
The SunnyStar D60SH-12 is a 60 mm square frame fan designed for small-form-factor cases or peripheral cooling where space is limited. It runs on 12 V DC and draws .18 A through a standard 2 pin power connector. The black non-LED housing keeps the appearance neutral for any build theme.
Sleeve bearing runs below 1600 RPM
A sleeve bearing keeps acoustic output low at the rated speed ceiling of <1600 RPM. Power draw stays modest at .18 A on the 12 V rail, so the fan adds minimal load to the system supply. The 25 mm thickness fits standard 60 mm mounting points without clearance issues.
Two-wire lead simplifies installation
The 2 pin connector plugs directly into motherboard or controller headers without adapters. No lighting or PWM circuitry means there is no software to configure and no extra cables to route. The package contains only the fan unit itself.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $19.99
- Typical for this category: the median of 8,339 items is $19.99.
- Fan size 60 mm
- Lower than about 83% of the 1,114 comparable items (median 120 mm).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product line | D60SH-12 |
| Model name | D60SH-12 |
| Product type | Case Fan |
| Product color | Black |
| Performance | |
| Rotational speed | <1,600 RPM |
| Power | |
| Power input connector | 2 Pin |
| Size & build | |
| Fan size | 60 mm |
| Bearing design | Sleeve bearing |
| Product dimensions | 60 × 60 × 25 mm |
| More details | |
| LED lighting | Non-LED |
Questions about this item
How do I install the 60mm 2-pin fan in a 12V header without reversing polarity?
Align the two wires with the 12V header pins, match the red wire to the positive pin, press the 60*60*25mm frame into the mounting holes, and secure with four screws.
When will the sleeve bearing need replacement?
The sleeve bearing typically lasts several years at <1600 RPM; expect increased noise or RPM drop as the lubricant ages, then swap the fan.
At what RPM does airflow plateau under sustained load?
The fan caps at <1600 RPM, so airflow stops increasing once that ceiling is reached during continuous operation.
More in PC Cooling Fans
Similar items
Noctua NF-F12 PWM 120mm 25mm 4-Pin Case Fan Brown
- 1 Fan
- No Controller
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
YESTON Zeaginal ZC-ZS-TI White LED 120mm Case Fan Quiet Edition
- 1 Fan
- 25 mm
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Noctua NF-S12A FLX 120mm 3-pin case fan 1200/900/700 RPM Brown
- 1 Fan
- No Controller





