AVGPC 2U 24-Bay 2x Xeon 4310 128GB DDR4 1TB NVME 2x 8TB SSD
- 128 GB
- 1 TB
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1U rack server with four hot-swap 3.5″ bays, a 3.8 GHz 4-core Xeon, 8 GB DDR4 ECC, MegaRAID 9361-8i controller, quad 10GBase-T ports, IPMI 2.0 and dual 500 W Platinum supplies
The Supermicro SYS-5019S-W4TR is a 1U rackmount server system equipped with an Intel Xeon E3-1270 v6 processor running at 3.8 GHz with four cores. It includes 8 GB of DDR4 memory and dual 500 W redundant power supplies. The chassis provides four hot-plug 3.5-inch drive bays and a dedicated IPMI 2.0 management port.
This server suits administrators who need dense 3.5-inch storage capacity and four 10GBase-T network ports in a single rack unit. The LSI MegaRAID 9361-8i controller supports RAID 0, 1, 5, 6, 10, 50 and 60. Buyers requiring GPU acceleration or more than four drive bays should look at larger platforms.
The defining specification is the four front-accessible 3.5-inch trays that accept both SATA and SAS drives via the onboard MegaRAID 9361-8i controller with 1 GB cache. This bay count and controller combination determines whether the chassis meets your storage density and redundancy requirements.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SUPERMICRO |
| Product line | CSE-815TQC-R504WB3-X11SSW-4TF |
| Model name | SYS-5019S-W4TR |
| Processor | |
| Processor | Intel Xeon |
| Processor core count | 4-Core Processor |
| Processor socket | LGA 1151 |
| Processor speed | 3.8 GHz |
| Installed CPUs | E3-1270 V6 |
| Memory | |
| Installed RAM | 8 GB |
| Storage | |
| Installed SSD | No |
| Disk controller | LSI MegaRAID 9361-8i Controller |
| Drive interface | SATA/SAS |
| Supported RAID levels | RAID 0/1/5/6/10/50/60 |
| Graphics | |
| Video RAM | 8 MB |
| Graphics chip | Matrox G200 |
| Connectivity | |
| Network controller | 4x 10GBase-T ports via Intel X540 10GBase-T Ethernet Controller |
| Ports & slots | |
| Management interface | RJ 45 |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 1U |
Slide each drive into a front bay until the latch clicks; the step often missed is securing the latch fully so the drive seats on the backplane SATA/SAS connector.
The two 500W redundant hot-swap power supplies and the MegaRAID 9361-8i controller's battery-backed cache module are the primary field-replaceable units.
The 1GB cache on the MegaRAID 9361-8i controller fills during sustained writes, after which throughput drops to the raw drive array speed.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?