We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Supermicro

Supermicro SYS-6018U-TR4T+ 1U rack server 2x E5-2699 v4 768GB DDR4 4x 3.5" bays

SKU CH-MG22-F58HK

1U rack server with dual 22-core Xeon processors, 768GB DDR4 ECC memory, LSI MegaRAID 9361-8i controller, four 3.5-inch hot-plug bays, quad 10GBase-T ports, IPMI 2.0.

  • ProcessorIntel Xeon
  • Installed RAM768 GB
  • Video RAM8 MB
  • Installed SSDNo
  • Processor core count22-Core Processor
  • Processor socketLGA 2011-3
  • Dual Xeon E5-2699 v4 22-core CPUs at 2.2 GHz with 3.6 GHz turbo for heavy compute
  • 768GB DDR4 2400MHz registered ECC memory across 24 DIMM slots for large datasets
  • MegaRAID 9361-8i controller supports RAID 0/1/5/6/10/50/60 with 1GB cache and battery backup
  • Quad 10GBase-T ports via Intel X540 controller for high-speed network connectivity
  • IPMI 2.0 with dedicated LAN enables KVM-over-LAN and virtual media remote management

Dual Xeon 1U server for dense compute

The Supermicro SYS-6018U-TR4T+ is a 1U rackmount system with two Intel Xeon E5-2699 v4 processors, each running at 2.2 GHz with 22 cores. It ships with 768 GB of DDR4 2400 MHz registered ECC memory across 24 DIMM slots. The platform targets virtualization, HPC and cloud workloads that need high core counts in minimal rack space.

Four 3.5-inch bays limit raw capacity

Only four hot-plug 3.5-inch SATA or SAS drive bays are provided, so total storage capacity is constrained by the number of large-form-factor drives you can install. The LSI MegaRAID 9361-8i controller supports RAID 0, 1, 5, 6, 10, 50 and 60 with 1 GB cache and battery backup. No drives are included, and the front bezel and rack rails are not supplied.

768 GB installed memory decides fit

The system arrives with 768 GB of DDR4 ECC memory, which is half the 1.5 TB maximum the board can address. If your workload needs more than 768 GB you must add modules; if it needs less, you are paying for capacity you may not use. Dual 750 W platinum power supplies and quad 10GBase-T ports with IPMI 2.0 complete the package.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $3,000.99
Pricier than about 65% of the 17,641 comparable items (median $1,910.99).
Installed RAM 768 GB
Higher than about 90% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameSUPERMICRO
Product lineCSE-819U + X10DRU-i+
Model nameSYS-6018U-TR4T+
Processor
ProcessorIntel Xeon
Processor core count22-Core Processor
Processor socketLGA 2011-3
Processor speed2.2 GHz
Installed CPUsE5-2699 V4
Memory
Installed RAM768 GB
Storage
Installed SSDNo
Disk controllerLSI MegaRAID 9361-8i Controller
Drive interfaceSATA/SAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerSupermicro AOC-UR-i4XT - Intel X540–4x RJ45 10GBase-T Ports
Ports & slots
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height1U

Questions about this item

Should I pick the 768 GB configuration or add more memory later?

The system ships with 768 GB across 24 slots using 32 GB DDR4 2400 MHz registered ECC modules. All slots are populated, so any increase requires replacing existing DIMMs up to the 1.5 TB maximum.

What does the 2.2 GHz base clock with 3.6 GHz turbo mean for real workloads?

Each Xeon E5-2699 v4 runs at 2.2 GHz base and can boost to 3.6 GHz. With 22 cores per processor the server delivers high multi-threaded throughput for virtualization and compute tasks.

How does the X540 10GBase-T interface limit storage or network speed?

The quad-port X540 provides four RJ45 10GBase-T links. Network throughput caps at 10 Gb/s per port, while the MegaRAID 9361-8i handles SAS 12 Gb/s and SATA drives internally.

More in Rack & Tower Servers

Similar items