We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Supermicro

Supermicro SYS-6018U-TR4T+ 1U rack server 2x Xeon E5-2667 v4 3.2GHz 8-core 32GB DDR4 4x 3.5" trays

SKU CH-ANRQ-Y7B32

1U rack server with dual Xeon E5-2667 v4 3.2GHz 8-core CPUs, 32GB DDR4 ECC, MegaRAID 9361-8i controller, four 3.5″ hot-swap bays, quad 10GBase-T LAN and IPMI 2.0, dual 750W redundant PSUs

  • ProcessorIntel Xeon
  • Installed RAM32 GB
  • Video RAM8 MB
  • Installed SSDNo
  • Processor core count8-Core Processor
  • Processor socketLGA 2011-3
  • Dual Xeon E5-2667 v4 processors run at 3.2GHz with 3.6GHz turbo
  • 32GB DDR4 2400MHz registered ECC memory installed
  • MegaRAID 9361-8i controller supports RAID 0/1/5/6/10/50/60 with 1GB cache
  • Four 10GBase-T RJ45 ports via Intel X540 controller
  • IPMI 2.0 provides KVM-over-LAN and virtual media over dedicated RJ45

Dual Xeon 1U server for dense compute

The Supermicro SYS-6018U-TR4T+ is a 1U rackmount system with two Intel Xeon E5-2667 v4 processors running at 3.2 GHz with eight cores each. It ships with 32 GB of DDR4 registered ECC memory installed across four modules. The platform targets virtualization hosts, HPC nodes and cloud workloads that need high core density in a single rack unit.

Hot-swap bays and quad 10GBase-T

Four 3.5-inch hot-plug trays accept SATA or SAS drives and connect to an LSI MegaRAID 9361-8i controller supporting RAID 0, 1, 5, 6, 10, 50 and 60 with 1 GB cache and battery backup. Networking uses a Supermicro AOC-UR-i4XT card providing four RJ45 10GBase-T ports via Intel X540. A dedicated RJ45 management port enables IPMI 2.0 with KVM-over-LAN and virtual media. Dual 750 W platinum hot-swap supplies deliver redundant power.

Replaces older dual-socket 2U boxes

The 1U form factor halves the rack footprint of traditional dual-processor servers while keeping 24 DIMM slots for up to 1.5 TB of DDR4. It suits teams consolidating legacy 2U systems that lack 10 GbE or modern RAID acceleration. The jump is worthwhile when density, 10GBase-T connectivity and hardware RAID with cache protection are required together. Buyers needing more than four 3.5-inch drives or front bezel and rails included should look elsewhere.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $402.99
Cheaper than about 94% of the 17,641 comparable items (median $1,910.99).
Installed RAM 32 GB
Lower than about 80% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameSUPERMICRO
Product lineCSE-819U + X10DRU-i+
Model nameSYS-6018U-TR4T+
Processor
ProcessorIntel Xeon
Processor core count8-Core Processor
Processor socketLGA 2011-3
Processor speed3.2 GHz
Installed CPUsE5-2667 V4
Memory
Installed RAM32 GB
Storage
Installed SSDNo
Disk controllerLSI MegaRAID 9361-8i Controller
Drive interfaceSATA/SAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerSupermicro AOC-UR-i4XT - Intel X540–4x RJ45 10GBase-T Ports
Ports & slots
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height1U

Questions about this item

What PCIe generation does the 9361-8i controller use, and what throughput does that cap at?

The LSI MegaRAID 9361-8i is a 12 Gb/s SAS controller on a PCIe 3.0 x8 link, so the practical ceiling is the 12 Gb/s per port SAS lane speed.

What rail kit or mounting hardware is required to install this 1U chassis in a standard rack?

The server uses the CSE-819U chassis; front bezel and rack-mount rails are not included, so you must supply compatible 1U slide rails for a 19" rack.

How is the IPMI 2.0 management port configured on first boot, and what step is commonly missed?

Connect the dedicated RJ45 IPMI LAN port, then set a static IP or enable DHCP in the BIOS/IPMI setup; the step often missed is saving the network settings before exiting the IPMI configuration menu.

More in Rack & Tower Servers

Similar items