We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Supermicro

Supermicro SYS-6028U-TR4T+ 2U rack server 2x Xeon E5-2650 v4 2.2GHz 256GB DDR4 12x 3.5" bays

SKU CH-VWWZ-VSNJG

A 2U dual-socket rack server with two 12-core Xeon E5-2650 v4 CPUs, 256GB DDR4 ECC memory, twelve 3.5-inch hot-swap bays, a MegaRAID 9361-8i controller, quad 10GBase-T ports.

  • ProcessorIntel Xeon
  • Installed RAM256 GB
  • Video RAM8 MB
  • Installed SSDNo
  • Processor core count12-Core Processor
  • Processor socketLGA 2011-3
  • Dual Xeon E5-2650 v4 processors at 2.2 GHz with 2.9 GHz turbo deliver 24 cores for heavy workloads
  • 256 GB DDR4 2400 MHz registered ECC memory across 8 modules ensures data integrity at scale
  • MegaRAID 9361-8i controller supports RAID 0/1/5/6/10/50/60 with 1 GB cache and battery backup
  • Twelve hot-swap 3.5" SATA/SAS drive bays provide dense storage capacity in 2U
  • Quad 10GBase-T ports via Intel X540 plus dedicated IPMI 2.0 LAN enable fast data and remote management

Dual-socket Xeon server for virtualisation workloads

This 2U rackmount system ships with two Xeon E5-2650 v4 processors at 2.2 GHz, each with 12 cores, and 256 GB of DDR4 ECC memory across eight 32 GB modules. It targets teams that need dense compute for virtual machines, databases or private cloud nodes without purchasing separate components.

Tool-less drive trays

Twelve 3.5-inch SATA/SAS hot-plug bays accept drives directly in the supplied trays, while the two 1000 W redundant supplies slide in from the rear without cables. The MegaRAID 9361-8i controller is pre-installed, but it only serves the first eight bays; the remaining four require an additional HBA or expander that is not included.

Steady throughput under continuous multi-tenant load

With both CPUs at 2.2 GHz base and 2.9 GHz turbo, the platform sustains high thread counts for hours without throttling, aided by Titanium-efficiency power supplies and front-to-rear airflow. Quad 10GBase-T ports from the Intel X540 controller keep network queues short during sustained replication or backup streams, and IPMI 2.0 provides remote KVM access if a node hangs.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,021.99
Cheaper than about 73% of the 17,641 comparable items (median $1,910.99).
Installed RAM 256 GB
Higher than about 60% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameSUPERMICRO
Product lineCSE-829UAC-R1K02-T
Model nameSYS-6028U-TR4T+
Processor
ProcessorIntel Xeon
Processor core count12-Core Processor
Processor socketLGA 2011-3
Processor speed2.2 GHz
Installed CPUsE5-2650 V4
Memory
Installed RAM256 GB
Storage
Installed SSDNo
Disk controllerLSI MegaRAID 9361-8i Controller
Drive interfaceSATA/SAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerSuperMicro AOC-2UR-6-i4XT - Intel X540–4x RJ45 10GBase-T Ports
Ports & slots
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height1U

Questions about this item

How can I verify the server is operating correctly after initial setup?

Connect to the dedicated RJ45 IPMI 2.0 port and use the web interface to confirm both Xeon E5-2650 v4 processors at 2.2GHz, all 256GB of DDR4 memory, the MegaRAID 9361-8i controller with 1GB cache, and the four X540 10GBase-T ports are detected without errors.

What components are included and what must I purchase separately?

The system ships with 2x Xeon E5-2650 v4 CPUs, 8x 32GB DDR4 modules, MegaRAID 9361-8i controller, 12x 3.5" hot-swap drive trays, AOC-2UR-6-i4XT quad 10GBase-T card, 2x 1000W PSUs, and IPMI 2.0. Hard drives, front bezel, and rack rails are not included.

Which configuration should I choose if I need more storage performance?

The installed MegaRAID 9361-8i supports RAID 0, 1, 5, 6, 10, 50, and 60 across the 12 SATA/SAS bays. Select SAS drives for higher IOPS or SATA drives for capacity; the 8-port controller manages up to eight drives directly.

More in Rack & Tower Servers

Similar items