We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2U rack server chassis with twelve front 3.5-inch drive trays

Supermicro

Supermicro SYS-6028U-TR4T+ 2U rack server 2x Xeon E5-2683 v4 2.1GHz 16-core 256GB DDR4 12x 3.5" bays

SKU CH-TMT4-2KJ5Q

A 2U rack server with dual Xeon 16-core CPUs, 256GB DDR4, 12 hot-swap 3.5" bays and quad 10GBase-T networking

  • ProcessorIntel Xeon
  • Installed RAM256 GB
  • Video RAM8 MB
  • Installed SSDNo
  • Processor core count16-Core Processor
  • Processor socketLGA 2011-3
  • Dual Xeon E5-2683 v4 processors deliver 32 total cores for heavy workloads
  • 256GB DDR4 2400MHz ECC memory supports large virtualisation environments
  • MegaRAID 9361-8i controller enables RAID 0, 1, 5, 6, 10, 50, 60
  • 12 hot-swap 3.5" SATA/SAS drive bays provide high-capacity storage expansion
  • Quad 10GBase-T ports via Intel X540 ensure fast network throughput

Dual-socket Xeon server for virtualization

This 2U rackmount system ships with two Intel Xeon E5-2683 v4 processors, each running at 2.1 GHz with 16 cores. A total of 256 GB of DDR4 2400 MHz registered ECC memory is installed across 8 DIMM slots, leaving 16 slots free for expansion up to the platform maximum of 1.5 TB. The board uses LGA 2011-3 sockets and the CSE-829UAC-R1K02-T chassis series.

Hot-swap drive bays and redundant titanium power

Twelve front-accessible 3.5-inch trays accept SATA or SAS drives and connect to the included LSI MegaRAID 9361-8i controller with 1 GB cache and battery backup. RAID levels 0, 1, 5, 6, 10, 50 and 60 are supported. Two 1000 W hot-swap power supplies provide redundancy. A dedicated RJ45 port gives IPMI 2.0 access with KVM-over-LAN and virtual media. Front bezel and rack rails are not included.

Quad 10GBase-T networking

The add-on card AOC-2UR-6-i4XT supplies four RJ45 10GBase-T ports driven by the Intel X540 controller. The MegaRAID 9361-8i handles eight SAS 12 Gb/s lanes, so four of the twelve bays require an additional controller or expander to be used. Video output is limited to the Matrox G200 with 8 MB memory, intended for management console use only.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $983.99
Cheaper than about 75% of the 17,641 comparable items (median $1,910.99).
Installed RAM 256 GB
Higher than about 60% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameSUPERMICRO
Product lineCSE-829UAC-R1K02-T
Model nameSYS-6028U-TR4T+
Processor
ProcessorIntel Xeon
Processor core count16-Core Processor
Processor socketLGA 2011-3
Processor speed2.1 GHz
Installed CPUsE5-2683 V4
Memory
Installed RAM256 GB
Storage
Installed SSDNo
Disk controllerLSI MegaRAID 9361-8i Controller
Drive interfaceSATA/SAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerSuperMicro AOC-2UR-6-i4XT - Intel X540–4x RJ45 10GBase-T Ports
Ports & slots
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height1U

Questions about this item

What RAID levels does the MegaRAID 9361-8i controller support on this server?

The MegaRAID 9361-8i supports RAID 0, 1, 5, 6, 10, 50 and 60 across its eight SAS 12Gb/s ports with 1GB cache and battery backup.

What rack-mount hardware is required to install this 2U chassis?

The server uses a standard 2U rack footprint but ships without front bezel or rack-mount rails; you must supply compatible sliding rails for your cabinet.

How is the IPMI 2.0 management interface connected and accessed?

A dedicated RJ45 IPMI LAN port provides IPMI 2.0 with virtual media and KVM-over-LAN; plug it into your management network and configure the IP address via BIOS or DHCP.

More in Rack & Tower Servers

Similar items