We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four-U rack chassis, thirty-six 3.5-inch drive bays front and rear, dual power supplies, plain black metal finish

Supermicro

Supermicro SYS-6048R-E1CR36N 36-bay 4U rack server 2x Xeon E5-2695 v4 2.1GHz 18-core 64GB DDR4

SKU CH-AHN1-GTPM5

36-bay 4U rack server with dual 18-core Xeon E5-2695 v4 processors, 64GB DDR4 ECC memory, MegaRAID 9361-8i controller, quad 10GBase-T LAN and dual 1280W Platinum power supplies

  • ProcessorIntel Xeon
  • Installed RAM64 GB
  • Video RAM8 MB
  • Installed SSDNo
  • Processor core count18-Core Processor
  • Processor socketLGA 2011-3
  • 36 hot-swap 3.5" drive bays for massive storage capacity
  • Dual 18-core Xeon E5-2695 v4 processors at 2.1 GHz for high compute throughput
  • 64 GB DDR4 2400 MHz ECC memory supports demanding workloads
  • LSI MegaRAID 9361-8i controller with RAID 0/1/5/6/10/50/60 protects data
  • Quad 10GBase-T LAN ports via Intel X540 enable fast networking

Supermicro 36-Bay 4U Storage Server

The Supermicro SYS-6048R-E1CR36N is a 4U rackmount server system designed for high-density storage workloads. It integrates dual Intel Xeon E5-2695 v4 processors, each providing 18 cores at 2.1 GHz, alongside 64 GB of DDR4 registered ECC memory. The chassis supports 36 hot-swap 3.5-inch drive bays for SAS or SATA media.

Suited For Dense Archive And Backup Targets

This platform suits organisations that need a single rack unit to hold up to 36 spinning disks behind a hardware RAID controller with battery-backed cache. The four 10GBase-T ports and dedicated IPMI 2.0 interface simplify integration into existing storage fabrics. Buyers who require more than eight internal SAS lanes from the RAID controller or who need front bezel and rack rails included should evaluate other platforms.

MegaRAID 9361-8i Eight-Port SAS Controller

The installed LSI MegaRAID 9361-8i provides eight internal 12 Gb/s SAS ports with 1 GB cache and battery backup, supporting RAID levels 0, 1, 5, 6, 10, 50 and 60. This controller determines how many drives can be addressed directly and which RAID modes are available. Verify that eight ports and the supported RAID levels match the planned array topology before purchase.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $773.99
Cheaper than about 83% of the 17,641 comparable items (median $1,910.99).
Installed RAM 64 GB
Lower than about 70% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameSUPERMICRO
Product lineCSE-847BE1C-R1K28LPB-X10DRi-T4+
Model nameSYS-6048R-E1CR36N
Processor
ProcessorIntel Xeon
Processor core count18-Core Processor
Processor socketLGA 2011-3
Processor speed2.1 GHz
Installed CPUsE5-2695 V4
Memory
Installed RAM64 GB
Storage
Installed SSDNo
Disk controllerLSI MegaRAID 9361-8i Controller
Drive interfaceSATA/SAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controller4x 10GBase-T LAN with Intel X540 Ethernet Controller
Ports & slots
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height1U

Questions about this item

What 3.5-inch drive trays are already included for the 36 hot-swap bays?

The system ships with 36 Supermicro 3.5-inch SAS/SATA hot-plug drive trays; no hard drives are installed.

Will the LSI MegaRAID 9361-8i controller recognise my existing SAS or SATA drives?

Yes, the controller supports both SAS and SATA interfaces and RAID levels 0, 1, 5, 6, 10, 50 and 60.

How can I confirm the IPMI 2.0 interface is active after installation?

Connect the dedicated RJ45 management port, then access the IPMI web interface to verify KVM-over-LAN and virtual media functions.

More in Rack & Tower Servers

Similar items