We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Supermicro

Supermicro SYS-6048R-E1CR36N 4U rack server 2x Xeon E5-2680 v4 14C 256GB DDR4 36x 3.5" bays

SKU CH-F51M-6RET1

A 4U rack server with dual 14-core Xeon processors, 256 GB DDR4 memory, an LSI MegaRAID 9361-8i controller and 36 hot-swap 3.5-inch drive bays for high-density storage

  • ProcessorIntel Xeon
  • Installed RAM256 GB
  • Video RAM8 MB
  • Installed SSDNo
  • Processor core count14-Core Processor
  • Processor socketLGA 2011-3
  • Dual Xeon E5-2680 v4 deliver 28 cores at 2.4 GHz
  • 256 GB DDR4 ECC memory supports demanding workloads
  • MegaRAID 9361-8i handles RAID 0, 1, 5, 6, 10, 50, 60
  • 36 hot-swap 3.5" bays provide massive storage density
  • Quad 10GBase-T ports with IPMI 2.0 enable fast management

Dual Xeon E5-2680 v4 server for dense storage

The SYS-6048R-E1CR36N is a 4U rack server built around two 14-core Xeon E5-2680 v4 processors running at 2.4 GHz with 3.3 GHz turbo. It ships with 256 GB of DDR4 ECC memory across eight 32 GB modules. The platform targets organisations that need high drive counts in a single chassis for archiving, backup targets or software-defined storage clusters.

36 hot-swap bays and dual 1280 W supplies

Thirty-six 3.5-inch SAS/SATA trays populate 24 front and 12 rear slots, all served by an LSI MegaRAID 9361-8i controller with 1 GB cache and battery backup. Quad 10GBase-T ports from an Intel X540 controller handle high-throughput networking, while a dedicated IPMI 2.0 LAN port provides KVM-over-LAN and virtual media. Redundant 1280 W 80 Plus Platinum power supplies support hot-swap replacement.

256 GB memory and 36-drive ceiling

The installed 256 GB DDR4 2400 MHz registered ECC suits typical storage workloads; the board accepts up to 1.5 TB of RDIMM or 3 TB of 3DS LRDIMM across 24 slots for memory-heavy duties. Drive capacity maxes out at the 36-bay limit, and the eight-port RAID controller constrains array count unless additional HBAs are added. No GPU expansion is practical beyond the onboard Matrox G200 with 8 MB video memory.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,227.99
Cheaper than about 67% of the 17,641 comparable items (median $1,910.99).
Installed RAM 256 GB
Higher than about 60% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameSUPERMICRO
Product lineCSE-847BE1C-R1K28LPB-X10DRi-T4+
Model nameSYS-6048R-E1CR36N
Processor
ProcessorIntel Xeon
Processor core count14-Core Processor
Processor socketLGA 2011-3
Processor speed2.4 GHz
Installed CPUsE5-2680 V4
Memory
Installed RAM256 GB
Storage
Installed SSDNo
Disk controllerLSI MegaRAID 9361-8i Controller
Drive interfaceSATA/SAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controller4x 10GBase-T LAN with Intel X540 Ethernet Controller
Ports & slots
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height1U

Questions about this item

What limits sustained throughput on the 9361-8i RAID controller?

The LSI MegaRAID 9361-8i provides eight 12Gb/s SAS ports and 1GB cache with battery backup, so drive count and RAID level set the practical ceiling.

How loud and hot does the 4U chassis get with dual 145W CPUs and 36 drives running 24/7?

Two 1280W 80 Plus Platinum supplies and redundant hot-swap cooling handle the thermal load; exact acoustics and temperatures depend on drive mix and airflow configuration.

Which rails and drives must I supply to populate the 36 hot-swap bays?

The server ships without rack rails or drives; you need 3.5" SAS/SATA drives and compatible mounting rails for your cabinet.

More in Rack & Tower Servers

Similar items