Mitsubishi
Mitsubishi GS2107-WTBD 10.4" Touchscreen HMI
- 10.4 in (26.4 cm)
- Touchscreen Monitor
$372.99
0.00461034BTC
In stock
SUPERNIGHT 24-Key RGB LED Strip Remote Controller 12V 2-Pack
Two-pack of 24-key wireless remotes controls 12 V RGB strips with 16 static colours and four dynamic modes
- Labor warranty1 Year
- Key featuresAdjustable
- Parts warranty1 Year
- Two-pack gives a spare when the original is lost or damaged
- Works with 5050 2835 3528 4-pin RGB strips
- 16 static colours plus four dynamic modes
- CR2032 battery powers the remote instantly
- DC 12 V supply matches standard LED strip voltage
24-Key RGB LED Remote Controller
The SUPERNIGHT 24-key remote controller operates 12 V DC 4-pin RGB LED strips using SMD 5050, 2835 or 3528 LEDs. It is a direct replacement for a lost or damaged original remote and ships as a two-pack so a spare is always on hand. Each unit is powered by a CR2032 battery and works immediately after the protective plastic tab is removed.
12 V Common-Anode Operation
The controller only supports common-anode strips with a shared positive wire; common-cathode wiring is not compatible. Each colour channel must not exceed 2 A of current draw to avoid damage. The supply voltage is strictly 12 V DC — connection to 24 V DC or 220 V AC will destroy the unit.
Sustained Wireless Control
Sixteen static colours and four dynamic modes — flash, strobe, fade and smooth RGB transition — are selectable wirelessly with brightness adjustment. The infrared link requires direct line of sight to the strip receiver for reliable operation during extended sessions. No mercury, UV or IR radiation is emitted by the remote itself.
How it compares
Measured against everything we stock in Industrial Automation & Panel PCs, at today’s prices. Recalculated every night.
- Price $15.99
- Cheaper than about 89% of the 27 comparable items (median $461.99).
Specifications
| Product | |
|---|---|
| Brand name | SUPERNIGHT |
Questions about this item
How do I install the remote and what step do people often miss?
Pull out the plastic battery tab from each remote, point the remote directly at the controller, and ensure your LED strip is a 4-pin common anode type running on DC12V.
What maintenance or replacement will the remote need later?
Each remote uses a CR2032 coin cell; replace it when the range drops or buttons stop responding.
What limit appears first under sustained use?
Each colour channel must not exceed 2A, so long runs at full brightness will hit that current limit before anything else.
More in Industrial Automation & Panel PCs
