SXDOOL 120mm Case Fan PFC1212DE 12V 4.8A 5500RPM 252.85CFM
A 120 mm server fan delivering 252.85 CFM at 5500 RPM with PWM control and dual 4-pin power connectors
- Product typeCase Fan
- Delivers 252.85 CFM airflow for dense server cooling
- Spins at 5500 RPM to move 7.16 m³/min through chassis
- Generates 1.412 in H₂O static pressure for restricted airflow paths
- PWM speed regulation via motherboard 4-pin header
- Dual 4-pin power interfaces ensure redundant supply
High-Performance Server Fan
The SXDOOL PFC1212DE is a 120mm case fan built for DELL R910 server chassis. It delivers 252.85 CFM airflow at 5500 RPM using a dual 4-pin motherboard and large 4-pin power supply interface. The frame and blades use PBT with 30% glass fibre and V0 flame retardant.
Suited for Demanding Cooling
This unit suits administrators replacing a 0H894R fan in a DELL R910 or similar high-density rack systems needing maximum static pressure of 1.412 in H2O. Builders requiring quiet operation below 66.5 dB(A) or standard PWM-only connectors should look at alternative models.
Dual-Power Interface Decides Fit
The defining specification is the combined motherboard 4-pin PWM plus large 4-pin power supply connector. Verify your chassis provides both headers; a standard 4-pin header alone cannot supply the 4.8A current this fan draws at 12V.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $26.99
- Pricier than about 68% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Case Fan |
Questions about this item
Will the 120mm 5500 RPM PFC1212DE fit alongside the existing 0H894R cooling assembly in a Dell R910 chassis?
Yes, this 120×120×38 mm fan matches the Dell R910 0H894R specification and uses the same dual motherboard 4-pin plus large 4-pin power interface, so it installs directly beside the original cooling hardware.
How can I confirm the fan is running at the rated 5500 RPM and 252.85 CFM after installation?
Connect the 4-pin PWM header to the motherboard and monitor speed via BIOS or software; the tachometer signal will report 5500 RPM at 12 V, and the dual power interface ensures the 4.8 A current draw needed for the rated 252.85 CFM airflow.
Does the 35 cm cable reach the motherboard 4-pin and PSU large 4-pin headers without extra adapters?
The 35 cm lead terminates in both a motherboard 4-pin PWM connector and a large 4-pin power-supply connector, so no separate adapters or cables are required for the dual-power design.
More in PC Cooling Fans
Similar items
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
BGears b-Blaster 80 80mm 3500 RPM 62 CFM 39 dBA 3-pin case fan
- 1 Fan
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Thermaltake SWAFAN GT14 140mm case fan CL-F157-PL14BL-A
- 1 Fan
- No Controller





