SXDOOL 135mm Case Fan 1800 RPM Dual Ball Bearing 2 Pin
135 mm case fan spins up to 1800 RPM with dual ball bearings and a two-pin connector for 12 V power
- Fan size135 mm
- Bearing design2 Ball
- Rotational speed1600-1,999 RPM
- Operating noise25–30 dBA
- Power input connector2 Pin
- LED lightingNon-LED
- 135 mm frame fits PSU and chassis mounts with 120 mm hole spacing
- Dual ball bearing design extends operating life at 1800 RPM
- 29 dBA noise level keeps system acoustics low under load
- 28 A draw on 12 V rail limits power budget impact
- Two-pin connector enables direct PSU or motherboard header power
135mm dual-ball-bearing case fan
The SXDOOL DFB13512H is a 135mm square chassis fan built around a dual ball bearing for longer service life. It runs on 12 V DC, draws 0.28 A and spins at 1800 RPM with a 10 % tolerance. The two-wire connector supplies power without speed reporting or PWM control.
Two-wire power connector
The red and black lead pair delivers simple voltage control through any 2-pin header or adapter. No tachometer signal or PWM input is present, so fan speed cannot be monitored or regulated by the motherboard. Builders who want software-controlled curves or RPM feedback need a three- or four-wire alternative.
120mm mounting holes and 29 dBA noise
Mounting holes are spaced at 120 mm, matching many 120mm fan patterns and some PSU shrouds. At 29 dBA the airflow is audible but not intrusive in a typical case. The 25 mm thickness and 135 mm frame limit use to locations that accept this specific footprint.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 90% of the 8,339 comparable items (median $19.99).
- Fan size 135 mm
- Higher than about 78% of the 1,114 comparable items (median 120 mm).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Case Fan |
| Product color | Black |
| Performance | |
| Rotational speed | 1600-1,999 RPM |
| Power | |
| Power input connector | 2 Pin |
| Size & build | |
| Fan size | 135 mm |
| Bearing design | 2 Ball |
| Environment & compliance | |
| Operating noise | 25–30 dBA |
| More details | |
| LED lighting | Non-LED |
Questions about this item
How long do the dual ball bearings last before they need replacement?
Dual ball bearings typically outlast sleeve bearings and can run for years at 1800 RPM without scheduled replacement.
What limits continuous operation at 1800 RPM?
The 0.28 A current draw and 29 dBA noise level are the main constraints during sustained use.
How much heat and noise does the fan produce when running all day?
It runs at 1800 RPM, draws 0.28 A at 12 V and emits 29 dBA, so heat output is low and noise stays moderate.
More in PC Cooling Fans
Similar items
Phanteks PH-F120M25_G2_DWT01 120mm 25mm ARGB case fan
- 1 Fan
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
BGears b-Blaster 60 60mm 5500 RPM 40 CFM 3-pin case fan
- 60 mm
- 1 Fan
Corsair RS120 PWM 120mm case fan CO-9050188-WW 25mm Magnetic Dome bearing
- 120 mm
- 1 Fan
BGears b-Blaster 90 90mm 3500 RPM 78 CFM 39 dBA 3-pin case fan
- 1 Fan
- No Controller





