SXDOOL 3115RL-04W-B76 80mm 12V 1.6A PWM case fan
An 80 mm PWM case fan spinning at 6500–6999 RPM and delivering 116 CFM through a 4-pin connector
- Fan size80 mm
- Rotational speed6500-6,999 RPM
- Airflow rate>80 CFM
- Operating noise> 50 dBA
- Power input connector4 Pin
- LED lightingNon-LED
- PWM speed control via 4-pin connector
- 116 CFM airflow at 6500–6999 RPM
- Double ball bearing rated 180000 hours MTTF
- Compact 80 × 80 × 38 mm frame fits tight builds
- 25 cm cable reaches most motherboard headers
80mm 12V PWM case fan
The SXDOOL 3115RL-04W-B76 is an 80mm case fan built around a NMB double ball-bearing motor. It runs on 12V DC and draws 1.60A through a standard 4-pin connector. The 25cm cable supports PWM automatic speed control for system-managed cooling.
Suited for tight 80mm mounts needing high airflow
Builders fitting compact chassis or legacy 80mm brackets will appreciate the 116CFM peak flow. The noise level exceeds 50 dBA at full speed so it is not a fit for silent-focused systems or noise-sensitive workspaces. Users wanting RGB illumination should look elsewhere as this is a non-LED unit.
Sustained output from double ball bearings
The double ball-bearing design with special IC targets 180000 hours MTTF for continuous duty. PWM control lets the motherboard lower RPM under light load to reduce wear and noise. At maximum 6500rpm ±10% the fan maintains the rated 116CFM without throttling.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 80% of the 8,339 comparable items (median $19.99).
- Fan size 80 mm
- Lower than about 75% of the 1,114 comparable items (median 120 mm).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Case Fan |
| Product color | Black |
| Performance | |
| Rotational speed | 6500-6,999 RPM |
| Airflow rate | >80 CFM |
| Power | |
| Power input connector | 4 Pin |
| Size & build | |
| Fan size | 80 mm |
| Environment & compliance | |
| Operating noise | > 50 dBA |
| More details | |
| LED lighting | Non-LED |
Questions about this item
What motherboard header is required for the 4-pin PWM connector on this 80mm fan?
A standard 4-pin PWM fan header supplies the 12 V rail and the PWM control signal that the 1.60 A motor needs.
Will the 25 cm cable reach a rear-exhaust header on a full-size ATX board when mounted in an 80 mm rear slot?
The 25 cm lead is designed for short runs such as an 80 mm rear mount to a nearby CPU or chassis fan header; measure your board layout before fitting.
How can I confirm the double ball-bearing motor is spinning at the rated 6500 rpm after installation?
Use BIOS hardware monitor or fan-control software to read the tachometer signal on the 4-pin header; it should report roughly 6500 rpm at full PWM duty.
More in PC Cooling Fans
Similar items
COUGAR CF-V12HB 120mm case fan 1200 RPM 60.4 CFM Hydro Dynamic
- 1 Fan
- No Controller
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Thermaltake Pure 20 CL-F015-PL20BL-A 200mm case fan
- 1 Fan
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan





