SXDOOL 45mm Case Fan 12V 2.3W 2-Pin Black
A 45 mm diameter case fan with 32 mm mounting holes, 12 V DC power and a 2-pin connector rated at 2.3 W
- Fan size45 mm
- Product colorBlack
- Compact 45 mm frame fits tight GPU or server slots
- 12 V DC power runs from standard motherboard headers
- Low 2.3 W draw keeps system power budget low
- 32 mm mounting holes match common 45 mm fan patterns
- Two-pin connector enables simple plug-and-play installation
45 mm 12 V Case Fan
This 45 mm black fan runs on 12 V and draws 2.3 W through a 2-pin connector. It matches the SUNON 125010VX-A and POWER LOGIC PLD05010S12HH form factor. The compact frame suits tight server or graphics-card cooling slots where a 45 mm diameter is required. Buyers needing larger airflow or PWM control should look elsewhere.
Installation Notes
The fan uses a standard 2-wire 2-pin plug that connects directly to a 12 V header. Mounting holes are spaced on a 32 mm circle, so verify the hole pattern before fastening. No speed signal wire is present, so the motherboard cannot monitor RPM. Over-tightening screws on the thin frame can crack the plastic housing.
Compatibility Check
Confirm the mounting surface has a 45 mm diameter cut-out and a 32 mm hole pitch. Ensure the power header supplies 12 V DC and accepts a 2-pin plug without a keying notch. Check that the 2.3 W draw fits within the header’s current limit. The fan has no PWM pin, so it will run at full speed continuously.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $15.99
- Cheaper than about 63% of the 8,339 comparable items (median $19.99).
- Fan size 45 mm
- Lower than about 88% of the 1,114 comparable items (median 120 mm).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
| Size & build | |
| Fan size | 45 mm |
Questions about this item
How can I confirm the SXDOOL 45mm fan is running correctly after connecting the 2-pin plug?
With power applied the blades should spin smoothly and quietly; you can also feel a steady airflow through the 32 mm mounting holes and verify the motor draws roughly 2.3 W at 12 V.
What comes in the box and what extra parts are needed to install the SUNON 125010VX-A on a graphics card?
The package contains only the 45 mm black fan with its 2-wire 2-pin lead; you must supply 3.2 cm mounting screws or clips and a 12 V DC header or adapter on the card.
Which version of the 45 mm case fan should I choose if my graphics card uses the POWER LOGIC PLD05010S12HH mounting pattern?
Select the SUNON 125010VX-A model — it matches the 45 mm diameter, 32 mm hole spacing, 12 V 2.3 W rating and 2-pin connector used by that POWER LOGIC reference.
More in PC Cooling Fans
Similar items
Corsair RS120 PWM 120mm case fan CO-9050188-WW 25mm Magnetic Dome bearing
- 120 mm
- 1 Fan
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
COUGAR CF-V12H 120mm case fan 1200 RPM 60.4 CFM 17.7 dB Hydro-Dynamic 25mm Orange
- 1 Fan
- No Controller





