We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60mm square case fan, 25mm thick, matte finish, no LED, two-pin connector

SXDOOL

SXDOOL 60mm Case Fan 24V 4500-4999 RPM 23.5 CFM

SKU CH-4XKH-ED43T

A 60 mm case fan spinning at 4500-4999 RPM, moving 23.5 CFM at 33.5 dBA on 24 V power

  • Fan size60 mm
  • Rotational speed4500-4,999 RPM
  • Airflow rate20-25 CFM
  • Operating noise30–35 dBA
  • Power input connector2 Pin
  • LED lightingNon-LED
  • High airflow for tight spaces with 23.5 CFM output
  • Maglev bearing reduces friction for 33.5 dBA quiet running
  • Low 1.9 W draw keeps 24 V systems efficient
  • Compact 60 x 60 x 25 mm frame fits dense server builds
  • 4500-4999 RPM range delivers strong static pressure of 0.21 inH2O

60 mm 24 V Maglev Case Fan

This 60 mm case fan runs on 24 V DC and draws 0.079 A for 1.9 W of power. It spins between 4500 and 4999 RPM using a maglev bearing and produces 23.5 CFM of airflow at a noise level of 33.5 dBA. The black, non-LED frame measures 60 by 60 by 25 mm and connects via a two-pin header. It is suited for server inverter cooling or tight chassis spots that can supply a 24 V rail.

Who it suits and who should look elsewhere

Builders with a 24 V fan header who need a compact 60 mm cooler for rack or embedded gear will find the airflow and maglev durability a good fit. It is not for systems that only provide other voltage rails, nor for users who want PWM speed control, RGB lighting or a larger form factor. Buyers who need higher static pressure or quieter sub-30 dBA operation should look at other models.

Deciding specification — 24 V supply requirement

The single detail that decides fitment is the 24 V operating voltage. If the motherboard, controller or power supply cannot deliver a 24 V DC rail to a two-pin header, the fan will not run. Verify the available voltage before purchasing.

How it compares

Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 85% of the 8,339 comparable items (median $19.99).
Fan size 60 mm
Lower than about 83% of the 1,114 comparable items (median 120 mm).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeCase Fan
Product colorBlack
Performance
Rotational speed4500-4,999 RPM
Airflow rate20-25 CFM
Power
Power input connector2 Pin
Size & build
Fan size60 mm
Environment & compliance
Operating noise30–35 dBA
More details
LED lightingNon-LED

Questions about this item

Does my system need a 24 V DC power source to run this 60 mm fan?

Yes, the fan is rated for 24 V and draws 0.079 A, so the power supply or controller must provide 24 V DC.

Will the 2-pin connector on this fan plug into a standard 3-pin or 4-pin motherboard header?

The fan uses a 2-pin connector; it fits a 3-pin header by leaving the sense pin empty, but a 4-pin PWM header will not provide speed control.

How can I confirm the fan is spinning at the rated 4500–4999 RPM after installation?

Check the RPM reading in BIOS or monitoring software; it should report within the 4500–4999 RPM range when the fan receives full 24 V.

More in PC Cooling Fans

Similar items