SXDOOL 90mm 3-pin case fan 12V 0.16A 2500RPM 19dB
A 90 mm chassis fan spins at 2500 RPM while producing only 19 dB of noise
- Fan size90 mm
- Power input connector3 Pin
- Ultra-quiet cooling at only 19 dB(A)
- 2500 RPM airflow for steady component temperatures
- 3-pin connector enables motherboard speed monitoring
- 90 mm frame fits standard chassis mounting points
- Low 0.16 A draw keeps power usage minimal
Compact 90 mm chassis fan
The SXDOOL 90 mm case fan runs on 12 V and draws 0.16 A through a three-pin connector. It spins at roughly 2500 RPM while producing 19 dB(A) of noise, making it a quiet choice for tight builds. The red, black and yellow leads provide power, ground and a speed signal for monitoring. It fits 90 mm or 92 mm mounting holes with a 25 mm frame depth.
Suited for low-noise intake or exhaust
This fan suits builders who need a slender 90 mm unit for case ventilation, power-supply replacement or small-form-factor chassis where space is limited. The fixed-voltage three-pin design means speed scales with voltage rather than a PWM signal. It is not for systems that require four-pin PWM control or higher airflow than 2500 RPM can deliver.
Three-pin voltage-controlled connector
The single specification that decides fit is the three-pin 12 V connector, which only supports voltage-based speed regulation. Motherboards or fan controllers without a three-pin header cannot drive this fan directly. Verify the header type before purchase.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 91% of the 8,339 comparable items (median $19.99).
- Fan size 90 mm
- Lower than about 70% of the 1,114 comparable items (median 120 mm).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Power | |
|---|---|
| Power input connector | 3 Pin |
| Size & build | |
| Fan size | 90 mm |
Questions about this item
Does the fan ship with mounting screws or do I need to buy them separately?
The listing only describes the fan itself — a 90 mm unit with a 3-pin connector — so mounting screws are not included and must be sourced separately.
Should I choose the 90 mm or 92 mm frame size for my case?
The product is specified as 90×90×25 mm and also noted as compatible with 92×92×25 mm mounting holes, so either frame size will fit the same fan.
How loud is 19 dB(A) at 2500 RPM inside a typical PC case?
At 19 dB(A) the fan is rated as very quiet; at 2500 RPM it moves enough air for general chassis cooling while remaining barely audible in most builds.
More in PC Cooling Fans
Similar items
Cooler Master MFX-B2NN-18NPK-R1 SickleFlow 120 V2 120mm case fan
- 1 Fan
- No Controller
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Thermaltake CL-F038-PL12WT-A 120 mm White LED Case Fan
- 1 Fan
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan





