SXDOOL AD0824HS-A70GL 80mm 24V 0.16A case fan
80 mm case fan running at 3000 RPM on 24 V with 38.65 CFM airflow and 35.2 dB/A noise
- Fan size80 mm
- Power input connector2 Pin
- Product typeCase Fan
- 80 mm frame fits standard case mounts
- 24 V DC operation for industrial and server power rails
- Hydraulic bearing reduces friction for longer service life
- 3000 RPM delivers 38.65 CFM airflow at 35.2 dB/A
- PBT housing with 30 % glass fibre meets 94V-0 flammability rating
80 mm 24 V case fan for industrial cooling
The SXDOOL AD0824HS-A70GL is an 80 mm case fan that runs on 24 V DC and draws 0.16 A. Its hydraulic bearing and 3000 RPM speed deliver 38.65 CFM airflow with 1.09 mm wind pressure at 35.2 dB/A. The frame and blades use PBT with 30 % glass fibre and a 94V-0 flame rating.
Suits 24 V systems needing a two-pin 80 mm fan
This fan fits equipment that supplies a 24 V two-pin header and accepts an 80 × 80 × 25 mm frame. It is not suited for builds that provide a different voltage header, require PWM speed control or need a three-pin or four-pin connector. Buyers who need lower noise or higher static pressure should look at alternative models.
24 V 0.16 A two-pin power specification
The decisive specification is the 24 V 0.16 A rating on a two-pin connector. Verify that your chassis or controller provides exactly this voltage and connector before ordering.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 80% of the 8,339 comparable items (median $19.99).
- Fan size 80 mm
- Lower than about 75% of the 1,114 comparable items (median 120 mm).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Case Fan |
| Power | |
| Power input connector | 2 Pin |
| Size & build | |
| Fan size | 80 mm |
Questions about this item
Does the 2-pin power connector plug directly into a 24 V DC header on my board?
The fan uses a 2-pin connector and is rated for 24 V DC at 0.16 A, so it requires a header that supplies 24 V.
Will the 80 mm frame with 25 mm thickness fit the same mounting holes as my existing 8025 fans?
Yes, the 80×80×25 mm dimensions match the standard 8025 form factor, so existing mounting holes align.
How can I confirm the fan is running at its rated 3000 RPM after installation?
Monitor the fan speed in BIOS or software; a reading near 3000 RPM with airflow around 38.65 CFM and noise near 35.2 dB/A shows it is operating as specified.
More in PC Cooling Fans
Similar items
COUGAR CF-V12HB 120mm case fan 1200 RPM 60.4 CFM Hydro Dynamic
- 1 Fan
- No Controller
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Thermaltake Pure 20 CL-F015-PL20BL-A 200mm case fan
- 1 Fan
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan





