SXDOOL ag0624ub207200 60mm 24V 6000rpm case fan
60 mm case fan delivering 31 CFM at 6000 rpm with ball-bearing reliability and stall-alarm monitoring
- Bearing designBall
- Power input connector3 Pin
- Product typeCase Fan
- Ball bearing rated 40000 hours for maintenance-free operation
- 6000 rpm delivers 31 cfm airflow in compact 60 mm frame
- 24 V 0.19 A draws only 4.56 W for efficient cooling
- Stalling alarm with speed detection alerts before overheating
- 38 dBA noise at 85 Pa pressure keeps servers quiet
60mm 24V Server Case Fan
The SXDOOL ag0624ub207200 is a 60mm square frame fan designed for 24 volt DC systems. It uses a ball bearing and a three-pin connector to deliver 6000rpm rotational speed with stall alarm feedback. The unit fits server chassis and frequency converters requiring a 6020 form factor.
Suited for 24V Industrial Builds
Technicians maintaining equipment that specifies a 24V 0.19A three-pin fan will find a direct match in airflow of 31cfm and static pressure of 85pa. Buyers needing a fan for standard desktop motherboards or PWM speed control cannot use this model due to the fixed voltage and connector type.
24V Three-Pin Voltage Requirement
The single specification that decides fitment is the 24V DC input paired with a three-pin power connector. If the target device does not supply exactly 24 volts on a three-pin header the fan will not operate correctly.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 90% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Case Fan |
| Power | |
| Power input connector | 3 Pin |
| Size & build | |
| Bearing design | Ball |
Questions about this item
What 3-pin header does the motherboard need to run this 24 V fan?
The fan uses a standard 3-pin connector for power and tachometer signal; the board must supply 24 V on that header.
Will the 60 mm frame and 20 mm depth fit the same mounting holes as my existing 6020 fans?
Yes, the 60 × 60 × 20 mm dimensions match the 6020 form factor, so existing screw holes align directly.
How do I confirm the stalling alarm is active after installation?
The third wire reports speed; if the RPM signal drops to zero while power remains, the motherboard or controller will flag a stall condition.
More in PC Cooling Fans
Similar items
Phanteks PH-F120M25_G2_DWT01 120mm 25mm ARGB case fan
- 1 Fan
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
BGears b-Blaster 60 60mm 5500 RPM 40 CFM 3-pin case fan
- 60 mm
- 1 Fan
Corsair RS120 PWM 120mm case fan CO-9050188-WW 25mm Magnetic Dome bearing
- 120 mm
- 1 Fan
BGears b-Blaster 90 90mm 3500 RPM 78 CFM 39 dBA 3-pin case fan
- 1 Fan
- No Controller





