We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60mm square case fan 10mm thick with three-pin connector

SXDOOL

SXDOOL DF126010BL 60mm 10mm 12V 3-pin ball bearing case fan

SKU CH-FDKS-K1B6G MPN DF126010BL

A 60 mm case fan with ball-bearing motor delivering 15-20 CFM at 3500-3999 RPM and 5-10 dBA noise on a 3-pin connector

  • Fan size60 mm
  • Rotational speed3500-3,999 RPM
  • Airflow rate15-20 CFM
  • Operating noise5–10 dBA
  • Power input connector3 Pin
  • LED lightingNon-LED
  • 60 mm frame fits compact builds
  • 12 V ball-bearing motor runs at 3500-3999 RPM
  • 15-20 CFM airflow moves heat from tight spaces
  • 5-10 dBA keeps system noise low
  • 3-pin connector enables speed monitoring

Compact 60 mm 12 V case fan

The SXDOOL DF126010BL is a 60 mm square frame fan that mounts in tight chassis locations where larger rotors will not fit. It runs on 12 V power and draws 0.18 A, making it suitable for small-form-factor builds, rack-mount appliances or targeted component cooling. The 3-pin connector provides basic voltage control without PWM circuitry. Builders who need higher static pressure or larger airflow volumes should look elsewhere.

Ball-bearing thermals and acoustics

A ball bearing supports the rotor at speeds between 3500 and 3999 RPM, delivering 15 to 20 CFM of airflow while the manufacturer rates noise at 5 to 10 dBA. The supplier data sheet also lists a 4200 RPM sample point with 18.26 CFM and 32 dBA, showing how sound rises with voltage. Power draw stays low at 0.18 A to 0.20 A, so the fan adds minimal load to a 12 V rail.

Included mounting hardware only

The package supplies the fan unit and standard mounting screws for 60 mm hole patterns. No fan-speed controller, adapter cables, rubber anti-vibration pads or software utilities are bundled. The 3-pin lead connects directly to a motherboard header or fan hub; any speed adjustment depends on the host system’s voltage-regulation capability.

How it compares

Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.

Price $9.99
Cheaper than about 91% of the 8,339 comparable items (median $19.99).
Fan size 60 mm
Lower than about 83% of the 1,114 comparable items (median 120 mm).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product colorBlack
Performance
Rotational speed3500-3,999 RPM
Airflow rate15-20 CFM
Power
Power input connector3 Pin
Size & build
Fan size60 mm
Environment & compliance
Operating noise5–10 dBA
More details
LED lightingNon-LED

Questions about this item

How do I mount the 60mm fan and which way should airflow point?

Use four screws through the 60mm square frame into your case fan slots; the label side is usually the intake, so aim it toward the component you want to cool.

When will the ball bearing need attention or replacement?

Ball bearings typically run for years; if noise rises above the rated 32 dBA or rotation becomes uneven, plan to swap the fan.

At what point does the 3-pin connector limit speed control under load?

Without a fourth PWM wire the motherboard can only vary voltage, so fine-grained speed curves below 3500 RPM are not possible.

More in PC Cooling Fans

Similar items