SXDOOL FD249225HB 92mm 24V 0.16A 2-pin case fan
92 mm axial case fan running on 24 V DC at 0.16 A with a 2-pin connector
- Fan size90 mm
- Axial airflow for compact chassis cooling
- 92 mm square frame fits standard 90 mm or 92 mm mounts
- 24 V DC input matches industrial and server power rails
- Low 0.16 A draw keeps power budget minimal
- Two-pin connector enables simple direct wiring
90 mm 24 V axial case fan
The SXDOOL FD249225HB is a 90 mm square axial fan built for 24 V DC systems. It draws 0.16 A through a two-pin connector and fits the 9025 or 9225 mounting pattern. The unit suits industrial enclosures, server chassis or custom cooling loops that run on a 24 V rail.
Two-pin plug and screw mounting
Installation uses four corner screws matching the 90 mm or 92 mm hole spacing. The 2-pin DC plug carries power only, so speed control or monitoring is not available. Misaligned screw holes or a reversed connector are the typical issues that prevent the fan from spinning.
Fixed-speed 24 V DC operation
The fan runs at a constant voltage with no PWM or voltage regulation built in. Airflow and noise stay at the factory setting because the two-wire interface cannot accept a control signal. Systems that need variable speed or tachometer feedback require a different fan design.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 85% of the 8,339 comparable items (median $19.99).
- Fan size 90 mm
- Lower than about 70% of the 1,114 comparable items (median 120 mm).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Fan size | 90 mm |
Questions about this item
How can I confirm the FD249225HB is spinning correctly after installation?
Connect the 2-pin plug to a 24 V DC header and verify the fan runs smoothly at the rated 0.16 A current draw.
What comes in the box and what extra parts might I need?
The package contains the 90×90×25 mm Y.S.TECH FD249225HB axial fan with a 2-pin DC connector; no mounting screws or adapters are included.
Which version of the FD249225HB should I choose for a 92 mm mounting pattern?
Select the 9225 size variant (92×92×25 mm) to match 92 mm screw holes; the 9025 variant fits 90 mm patterns.
More in PC Cooling Fans
Similar items
BGears b-Blaster 120 120mm 2000 RPM 103 CFM 35 dBA 3-pin case fan
- 1 Fan
- No Controller
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan





