SXDOOL FD7015H12D 12V 0.43A 7 cm case fan
A 7 cm blower fan with dual ball bearings delivers 10.75 CFM at up to 4800 RPM under 4-wire PWM control
- Adjustable cooling with 1000–4800 RPM PWM control
- Dual ball bearings rated for 80000 hours life
- 75 CFM airflow at 4800 RPM peak speed
- Operates from 10.8 V to 13.2 V range
- 49 dBA noise at maximum 4800 RPM speed
12 V PWM case fan with dual ball bearing
The FD7015H12D is a 7 cm blower-style fan built for server and industrial chassis. It runs on 12 V DC with a 0.43 A draw and uses a four-wire PWM circuit for automatic speed control. Dual ball bearings support a rated life of 80,000 hours.
Suited for tight 1U or blade servers needing
This fan delivers 10.75 CFM at up to 4,800 RPM, making it appropriate for high-density enclosures where directed cooling is required. The 49 dBA noise level at maximum speed rules it out for quiet workstations or home-theatre PCs. Builders who need larger-diameter fans or lower acoustic profiles should consider other form factors.
4-wire PWM speed control from 1,000 to 4,800 RPM
The PWM interface lets the motherboard or fan controller vary speed between 1,000 and 4,800 RPM within a ±10 % tolerance. This range is the decisive specification: verify that your board supplies a standard PWM header and that the target component can operate within this speed window before purchasing.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $14.99
- Cheaper than about 67% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will this FD7015H12D blower fan fit the 4-pin PWM header on my current motherboard?
Yes, the fan uses a standard 4-wire PWM connector that plugs directly into any 4-pin CPU or chassis fan header supplying 12 V.
If I keep my existing 3-pin case fans on the same controller, will the FD7015H12D still respond to PWM signals independently?
The fan accepts PWM control from 1000 to 4800 RPM while 3-pin fans on the same controller run at fixed voltage; each header manages its own signal.
How can I confirm the FD7015H12D is running at its rated 10.75 CFM after installation?
At maximum PWM duty the fan should spin near 4800 RPM and produce 49 dBA; match those readings in BIOS or monitoring software to verify full airflow.
More in PC Cooling Fans
Similar items
STARTECH FAN7X10TX3 70mm 10mm 3500 RPM Ball Bearing Case Fan
- 1 Fan
- No Controller
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Noctua NF-A9 PWM 92mm case fan 4-pin 2000 RPM brown
- 1 Fan
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
COUGAR CF-V14H 140mm Case Fan 1200 RPM Hydro-Dynamic Bearing
- 1 Fan
- No Controller





