We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 30mm square frame fan with magnetic levitation bearing

SXDOOL

SXDOOL HA30101V3-0000-A99 30mm 12V 0.44W magnetic levitation case fan

SKU CH-S2MD-7GN21

A 30 mm magnetic levitation case fan spinning above 7000 RPM with 15 to 20 dBA noise and 12 V 0.44 W power draw

  • Fan size30 mm
  • Rotational speed>7,000 RPM
  • Airflow rate1-5 CFM
  • Operating noise15–20 dBA
  • Power input connector2 Pin
  • LED lightingNon-LED
  • Magnetic levitation reduces friction for longer life
  • 12 V 0.44 W draws minimal power from the supply
  • 30 mm frame fits ultra-compact chassis slots
  • >7 000 RPM delivers focused airflow where space is tight
  • 15–20 dBA keeps system noise near-silent

30 mm 12 V magnetic levitation case fan

The SXDOOL HA30101V3-0000-A99 is a 30 mm square case fan that runs on 12 V and draws 0.44 W. Magnetic levitation bearings keep friction low and allow speeds above 7000 RPM while the motor stays quiet at 15 to 20 dBA. A simple two-pin connector supplies power without any lighting or speed-signal wires. Its 3010 form factor fits tight spots where larger fans cannot be mounted.

Who this suits and who should look elsewhere

Builders cooling small-form-factor cases, rack appliances or GPU backplates will appreciate the slim 30 mm profile and the 1 to 5 CFM airflow range. The low noise floor helps in noise-sensitive workstations or home-theatre PCs. Buyers who need higher static pressure for dense radiators, or who want PWM control and addressable lighting, should look at larger or four-pin models instead.

Deciding specification: 30 mm frame

The 30 mm frame size and two-pin 12 V connection are the critical fitment details. Verify that your chassis or device has a 3010 mounting pattern and a matching two-pin header before ordering. The 0.44 W draw is modest, but the connector type cannot be adapted without a separate cable. If the mounting holes or power header differ, this fan will not install correctly.

How it compares

Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.

Price $13.99
Cheaper than about 70% of the 8,339 comparable items (median $19.99).
Fan size 30 mm
Lower than about 97% of the 1,114 comparable items (median 120 mm).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product colorBlack
Performance
Rotational speed>7,000 RPM
Airflow rate1-5 CFM
Power
Power input connector2 Pin
Size & build
Fan size30 mm
Environment & compliance
Operating noise15–20 dBA
More details
LED lightingNon-LED

Questions about this item

Which SXDOOL 30mm 12V fan should I choose for a tight 3010 mounting space?

The HA30101V3-0000-A99 fits the 30x30x10mm footprint and uses a 2-pin connector, making it the direct match for that slot.

What does the >7000 RPM rating deliver inside a live chassis?

It produces 1-5 CFM of airflow at 15-20 dBA, so it moves a modest air volume quietly in confined areas.

How does the 2-pin 12V interface limit speed control?

The two-wire design supplies fixed 12V power with no PWM or voltage-regulation line, so the fan runs at full >7000 RPM whenever powered.

More in PC Cooling Fans

Similar items