SXDOOL PLA08010S05L 80mm 5V 0.15A USB case fan
80 mm sleeve-bearing fan runs on 5 V USB power with an extra-long cable
- Fan size80 mm
- Power input connectorUSB 1.1/2.0
- USB powered convenience plugs into any 5V port
- 80mm frame fits tight case spaces
- 15A draw keeps power use minimal
- sleeve bearing runs quietly at low speed
- extra long cable reaches awkward motherboard headers
Compact USB-powered 80 mm case fan
The SXDOOL PLA08010S05L is an 80 mm square frame fan that draws power from a standard USB 1.1 or 2.0 port. It suits builders who need a low-voltage airflow boost for tight chassis spaces or peripheral cooling without tapping the motherboard fan header.
Sleeve bearing thermals and 5 V draw
A sleeve bearing keeps acoustic output low during typical operation while the 5 V 0.15 A rating limits power draw to a fraction of a watt. The modified USB connector includes an extra-long lead for flexible routing inside small enclosures.
USB 1.1/2.0 power connector decides fit
The sole power interface is a USB 1.1/2.0 plug, so the fan only works where a spare USB port is available. Builds that rely exclusively on 3-pin, 4-pin or Molex headers cannot use this unit without an adapter.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 70% of the 8,339 comparable items (median $19.99).
- Fan size 80 mm
- Lower than about 75% of the 1,114 comparable items (median 120 mm).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Power | |
|---|---|
| Power input connector | USB 1.1/2.0 |
| Size & build | |
| Fan size | 80 mm |
Questions about this item
How do I install the 80mm fan using the modified USB interface with the extra-long line?
Plug the USB 1.1/2.0 connector into any powered USB port, then secure the 80*80*10mm frame with four screws through the corner holes; the extra-long cable lets you route behind the motherboard tray so the plug reaches without tension.
What maintenance will the sleeve bearing need later?
Sleeve bearings run dry over time; after a year or two of continuous use expect rising noise, then replace the whole 5V 0.15A unit — no relube port exists.
What limit appears first during sustained 5V 0.15A operation?
The sleeve bearing’s heat tolerance is the first ceiling; prolonged load raises internal friction until RPM drops or the fan stalls.
More in PC Cooling Fans
Similar items
Cooler Master R4-S2S-124K-GP Silent Fan 4-pack 120mm 1200 RPM 19.1 dBA
- 4 Fans
- No Controller
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan





