SXDOOL PLD05010S12HH 12V 0.25A 46mm 58mm 4-pin case fan
Cools graphics cards with a 46 mm blade, 58 mm mounting pitch and 4-pin PWM control
- 12 V 0.25 A draw keeps power use low
- 46 mm blade fits tight graphics-card spaces
- 58 mm hole pitch matches common GPU mounts
- 4-pin PWM header allows precise speed control
- New condition ensures full rated lifespan
Compact 46 mm fan for tight builds
The SXDOOL PLD05010S12HH is a 12 V DC case fan with a 46 mm blade diameter and a 58 mm mounting pitch. It draws 0.25 A through a standard 4-pin PWM connector for automatic speed control. This form factor suits graphics-card coolers or small-form-factor chassis where full-size fans cannot fit.
Drops into 58 mm hole patterns with PWM control
The 58 mm screw spacing matches many reference GPU shrouds and compact cases, so no adapter brackets are required. Four-wire PWM lets the motherboard or GPU controller vary RPM based on temperature, reducing noise at idle. Only a 12 V fan header is needed; no extra power cables or controllers are involved.
Replaces worn 46 mm 12 V fans on GPU coolers
When the original blower or axial fan fails or becomes noisy, this unit restores targeted airflow over the heatsink. The jump is worth it if the existing fan uses the same 58 mm pitch and 4-pin interface. Builders needing higher static pressure for radiators or larger airflow for case ventilation should look elsewhere.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $14.99
- Cheaper than about 67% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How long can the PLD05010S12HH run at 12 V and 0.25 A before the motor reaches its thermal limit?
The fan is rated for continuous operation at 12 V and 0.25 A; its thermal limit is reached only if airflow is blocked or ambient temperature exceeds the motor's design range.
What noise level and heat output should I expect from the 46 mm blade running all day at 12 V?
At 12 V the 46 mm blade produces a low hum typical of small DC fans; heat output is minimal because the motor draws only 0.25 A.
Which header must my motherboard or graphics card provide for the 4-wire 4-pin connector?
A standard 4-pin PWM fan header with 58 mm hole spacing is required to power and control the PLD05010S12HH.
More in PC Cooling Fans
Similar items
Noctua NF-A9 PWM 92mm case fan 4-pin 2000 RPM brown
- 1 Fan
- No Controller
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
COUGAR CF-V14H 140mm Case Fan 1200 RPM Hydro-Dynamic Bearing
- 1 Fan
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan





