We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 47mm square cooling fan with 39mm mounting holes and two-wire connector

SXDOOL

SXDOOL PLD05010S12L 12V 47mm 39mm pitch 2-wire fan accessory

SKU CH-6NYD-GHRDQ

12V 47mm graphics card cooling fan with 39mm mounting pitch and 2-wire connector

  • 12V power for reliable GPU cooling
  • 47mm diameter fits tight graphics-card spaces
  • 39mm hole pitch matches common mounting patterns
  • 2-wire 2-pin connector enables simple installation

12 V 47 mm graphics-card cooling fan

The SXDOOL PLD05010S12L is a 12 V axial fan built for graphics-card coolers that use a 47 mm frame and a 39 mm mounting pitch. It connects through a two-wire, two-pin header for simple power delivery. The compact 4.5 cm diameter suits tight cooler shrouds where larger fans will not fit. Builders replacing a worn or noisy original fan on a compatible heatsink will find it a direct mechanical match.

Thermals noise and power draw in normal use

The two-wire design runs at a fixed 12 V, so airflow and acoustic output remain constant once powered. Without PWM control the fan cannot reduce speed during light loads, meaning noise levels stay the same whether the GPU is idle or under load. Power draw is limited to the small current required by a 47 mm motor at 12 V. Users needing variable speed or lower idle noise should confirm their cooler supports voltage regulation before fitting this unit.

How it compares

Measured against everything we stock in Cable Locks & Laptop Extras, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 63% of the 8,808 comparable items (median $16.99).

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the PLD05010S12L fan on my graphics card, and which step is often missed?

Align the four mounting holes with the 39mm pitch on the graphics card heatsink, then secure each corner with the supplied screws; the step most often missed is checking that the 2-pin connector is fully seated on the 12V header before powering on.

What maintenance will this 47mm cooling fan need over time?

Dust buildup on the blades and frame reduces airflow, so use compressed air to clean the fan every few months; if bearing noise appears or rotation becomes uneven, replace the entire PLD05010S12L unit.

More in Cable Locks & Laptop Extras

Similar items