SXDOOL QUR0812SH 80mm 12V 0.5A PWM case fan
An 80 mm PWM case fan with a 4-pin connector, 12 V 0.5 A rating and 5000 RPM speed
- Fan size80 mm
- Bearing design2 Ball
- Power input connector4 Pin
- Product typeCase Fan
- PWM speed control matches cooling to demand
- 5000 RPM airflow for high-performance cooling
- Hydraulic magnetic bearing rated 60000 hours
- 80 mm frame fits standard case mounts
- 12 V 0.5 A draws minimal power
SXDOOL 80mm PWM case fan
The SXDOOL QUR0812SH is an 80mm case fan designed for system builders who need active cooling in compact chassis or legacy motherboards that retain 80mm mounts. It draws .5 A at 12 V and uses a four-pin PWM connector so the motherboard can regulate speed automatically.
Four-pin PWM speed control limits
PWM control adjusts the fan between idle and the rated 5000 RPM, but the motherboard header must supply a clean PWM signal and sufficient current; boards that only offer voltage control on four pins will not modulate speed correctly. The .50 A draw also means headers limited to lower current may throttle or shut down the fan under load.
Straightforward 80mm installation
The fan fits standard 80 * 80 * 25 mm mounting holes and secures with four screws; no special brackets are required. Builders sometimes overtighten screws and distort the plastic frame, which can unbalance the hydraulic bearing and increase noise. Verify header orientation before powering on to avoid reversed polarity.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 80% of the 8,339 comparable items (median $19.99).
- Fan size 80 mm
- Lower than about 75% of the 1,114 comparable items (median 120 mm).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Case Fan |
| Power | |
| Power input connector | 4 Pin |
| Size & build | |
| Fan size | 80 mm |
| Bearing design | 2 Ball |
Questions about this item
Is the 80 mm frame with 25 mm depth the right fit for my case?
The fan measures 80 × 80 × 25 mm, so it fits standard 80 mm mounting holes with 25 mm clearance.
What airflow and noise should I expect from the 5000 RPM rating?
At 5000 RPM the hydraulic magnetic bearing moves a high volume of air; actual CFM and dBA depend on case restriction and fan curve.
Does the 4-pin PWM connector let the motherboard control speed automatically?
Yes, the 4-pin connector supports PWM intelligent temperature control so the board can vary speed from minimum to 5000 RPM.
More in PC Cooling Fans
Similar items
COUGAR CF-V12HB 120mm case fan 1200 RPM 60.4 CFM Hydro Dynamic
- 1 Fan
- No Controller
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Thermaltake Pure 20 CL-F015-PL20BL-A 200mm case fan
- 1 Fan
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan





