We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 250 mm case fan with 30 mm depth, dual ball bearing, non LED, Molex 4D connector

SXDOOL

SXDOOL SXD2530B12H 250mm case fan 1200 RPM 40 dBA 12 V

SKU CH-F7Z7-CPVKY MPN SXD2530B12H

Large 250 mm case fan moves up to 120 CFM at 1,200 RPM with dual-ball bearings rated for 50,000 hours

  • Fan size250 mm
  • Bearing design2 Ball
  • Rotational speed<1,600 RPM
  • Airflow rate>80 CFM
  • Operating noise40–45 dBA
  • Power input connectorLP4
  • 250 mm diameter moves large air volumes for spacious cases
  • dual ball bearing rated for 50 000 hours of continuous operation
  • 120 CFM airflow at 1 200 RPM keeps components cool
  • 40 dBA noise level runs quietly under load
  • includes 25 cm grill and mounting hardware for easy install

250 mm case fan for servers and chassis

This 250 mm case fan is built for large computer cases and server enclosures that need high-volume airflow through a single mounting point. It targets system builders and IT staff who want a direct 12 V DC cooler without the complexity of PWM control or addressable lighting. The non-LED black frame keeps the installation visually neutral in professional or rack environments.

120 CFM airflow with dual-ball bearing longevity

At 1200 RPM the fan moves 120 CFM while producing 40 to 45 dBA, and the supplier rates the dual-ball bearing for 50000 hours of continuous operation. The bearing design also allows horizontal or vertical mounting without affecting lifespan. Headroom exists up to the listed maximum of 1600 RPM, though noise rises toward the upper end of the acoustic range.

LP4 Molex 4D power connector only

The fan draws 1.5 A at 12 V through a two-wire LP4 Molex 4D connector, so the host system must provide that specific header or an adapter. No PWM signal wire is present, meaning speed control relies on voltage regulation rather than a motherboard fan curve. Builders without a free LP4 port or voltage-controlled header should verify compatibility before purchase.

How it compares

Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.

Price $31.99
Pricier than about 78% of the 8,339 comparable items (median $19.99).
Fan size 250 mm
Higher than about 94% of the 1,114 comparable items (median 120 mm).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product colorBlack
Performance
Rotational speed<1,600 RPM
Airflow rate>80 CFM
Power
Power input connectorLP4
Size & build
Fan size250 mm
Bearing design2 Ball
Environment & compliance
Operating noise40–45 dBA
More details
LED lightingNon-LED

Questions about this item

Will the 250 mm fan fit alongside my existing 120 mm case fans?

The fan measures 250 mm in diameter and 30 mm thick, so verify your case has a matching mounting area; it uses the same 12 V supply as standard fans.

How can I confirm the dual-ball bearing fan is running at the rated 1200 RPM after installation?

Connect the LP4 Molex 4D plug, then check RPM in BIOS or monitoring software; the spec is 1200 RPM with a 10 % tolerance.

Does the package include the Molex power cable or do I need to buy one separately?

The box contains the 250 mm fan, a 25 cm grill, four mounting screws and nuts; the fan has a fixed LP4 Molex 4D connector that plugs directly into a PSU lead.

More in PC Cooling Fans

Similar items